Skroutz.mt

Satel Wired Contact Sensor NC
Door & Window Sensors

Satel Wired Contact Sensor NC

The XD-2 is a multifunctional wired detector that can operate with any alarm control panel. The XD-2 can function as:

  • magnetic contact
  • vibration detector
  • vibration detector and magnetic contact
  • water...

The XD-2 is a multifunctional wired detector that can operate with any alarm control panel. The XD-2 can function as:

  • magnetic contact
  • vibration detector
  • vibration detector and magnetic contact
  • water flood detector

The XD-2 can also be used outdoors, even in harsh weather conditions, if placed inside the OPX-1 case. When the XD-2 is installed outside to...

See full description See full description

  • Connection Method

    Wired

    Connects to the installation system via cable.

  • Contact Operation

    Contact NC

    The circuit is closed when the door is also closed. When the door opens, the circuit opens as well and the alarm is triggered. It offers maximum security because it is activated even if the cable is cut.

  • Tamper

    Refers to protection against attempts to tamper with the device. For example, if someone tries to open the sensor's casing or remove it from its position, the sensor will send an alarm signal.
  • See all
Review the product
Product report

Description

Description

The XD-2 is a multifunctional wired detector that can operate with any alarm control panel. The XD-2 can function as:

  • magnetic contact
  • vibration detector
  • vibration detector and magnetic contact
  • water flood detector

The XD-2 can also be used outdoors, even in harsh weather conditions, if placed inside the OPX-1 case. When the XD-2 is installed outside to operate in one of the modes that require the use of a magnet for proper functioning, the OPXM-1 (magnet in a sealed case) must be used.

Available in white (XD-2), brown (XD-2 BR), or dark grey (XD-2 DG).

Detector type selection with DIP switches.

Functions:

  • Magnetic contact:
    • Detection of door, window, etc. opening.
    • Input for connecting NC type detector.
    • 1 alarm output.
  • Vibration detector:
    • Detection of vibrations and tremors accompanying attempts to breach a door or window.
    • Input for connecting NC type detector.
    • 1 alarm output.
  • Vibration detector and magnetic contact:
    • Detection of vibrations and tremors accompanying attempts to breach a door or window, etc.
    • Detection of door, window, etc. opening.
    • Input for connecting NC type detector.
    • 1 or 2 alarm outputs.
  • Water flood detector:
    • Flood detection in areas with plumbing.
    • Input for connecting external detector attention FPX-1 (white), FPX-1 BR (brown) or FPX-1 DG (dark grey) - the front panel is available separately.
    • 1 alarm output.

LED indicator, removable activation/deactivation of the LED indicator, power supply voltage check, tamper protection against opening the case and removal from the mounting surface.

Includes 2 magnets (for surface and built-in mounting).

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Connection Method
Wired

Connection Method

Wired
Connects to the installation system via cable.
Contact Function
Contact NC

Contact Function

Contact NC

The circuit is closed when the door is also closed. When the door opens, the circuit opens as well and the alarm is triggered. It offers maximum security because it is activated even if the cable is cut.
Battery
No

Battery

Powered wirelessly by battery.
Metallic
No

Metallic

Heavy-duty metal contact suitable for use on iron doors, shutters, garage doors, etc.
Tamper
Yes

Tamper

Refers to protection against attempts to tamper with the device. For example, if someone tries to open the sensor's casing or remove it from its position, the sensor will send an alarm signal.
Pieces
1 pcs

Installation

Screw-in
No

Screw-in

Can be installed with screws.
Adhesive
No

Adhesive

Can be installed with adhesive tape.
Recessed
No
Nailed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The XD-2 is a multifunctional wired detector that can operate with any alarm control panel. The XD-2 can function as:

  • magnetic contact
  • vibration detector
  • vibration detector and magnetic contact
  • water flood detector

The XD-2 can also be used outdoors, even in harsh weather conditions, if placed inside the OPX-1 case. When the XD-2 is installed outside to operate in one of the modes that require the use of a magnet for proper functioning, the OPXM-1 (magnet in a sealed case) must be used.

Available in white (XD-2), brown (XD-2 BR), or dark grey (XD-2 DG).

Detector type selection with DIP switches.

Functions:

  • Magnetic contact:
    • Detection of door, window, etc. opening.
    • Input for connecting NC type detector.
    • 1 alarm output.
  • Vibration detector:
    • Detection of vibrations and tremors accompanying attempts to breach a door or window.
    • Input for connecting NC type detector.
    • 1 alarm output.
  • Vibration detector and magnetic contact:
    • Detection of vibrations and tremors accompanying attempts to breach a door or window, etc.
    • Detection of door, window, etc. opening.
    • Input for connecting NC type detector.
    • 1 or 2 alarm outputs.
  • Water flood detector:
    • Flood detection in areas with plumbing.
    • Input for connecting external detector attention FPX-1 (white), FPX-1 BR (brown) or FPX-1 DG (dark grey) - the front panel is available separately.
    • 1 alarm output.

LED indicator, removable activation/deactivation of the LED indicator, power supply voltage check, tamper protection against opening the case and removal from the mounting surface.

Includes 2 magnets (for surface and built-in mounting).

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Connection Method
Wired

Connection Method

Wired
Connects to the installation system via cable.
Contact Function
Contact NC

Contact Function

Contact NC

The circuit is closed when the door is also closed. When the door opens, the circuit opens as well and the alarm is triggered. It offers maximum security because it is activated even if the cable is cut.
Battery
No

Battery

Powered wirelessly by battery.
Metallic
No

Metallic

Heavy-duty metal contact suitable for use on iron doors, shutters, garage doors, etc.
Tamper
Yes

Tamper

Refers to protection against attempts to tamper with the device. For example, if someone tries to open the sensor's casing or remove it from its position, the sensor will send an alarm signal.
Pieces
1 pcs

Installation

Screw-in
No

Screw-in

Can be installed with screws.
Adhesive
No

Adhesive

Can be installed with adhesive tape.
Recessed
No
Nailed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

37,99 €
14,00 €   shipping cost