Low pressure foam gun TYTAN 65 750ml. The first gun foam with the highest yield on the market - up to 65 liters - and the lowest post-expansion. It is characterized by excellent acoustic insulation.

Features:

• does not emit MDI vapors during application
• performance: 55 to 65 l (canister capacity 1000ml)
• volume increase (after expansion): 30 to 60%
• acoustic insulation: up to 61 dB
• low pressure formula (prevents deformation)
• new valve, more resistant to clogging and gas leakage

Application:

• installation of doors and windows
• filling gaps
• thermal and acoustic insulation
• fillings and sealings in frame structures

Instructions for use: Doors and window frames must be installed with mechanical fasteners. Before application, clean, degrease, and dampen the surface with water. Shake the canister several times and screw the foam onto the gun adapter. During application, hold the canister upside down. Fill the gap by approximately 70%. Processing time: about 25 minutes. Protect the cured foam from ultraviolet radiation using sealant, plaster, or paint (not earlier than 24 hours after application).

Technical specifications:

• skin time: from 15 to 30 minutes
• ambient temperature: from +5oC to +30oC
• can temperature: from +10oC to +30oC
• water absorption (after 24 hours): ≤1.5%
• high thermal insulation and acoustic insulation
• resistant to molds and fungi
• flammability category: F / B3 (EN 13 501 / DIN 4102-1)
• manufactured in accordance with ISO 9001:2000
• does not emit CFC and HCFC gases ("ozone-friendly")
• shelf life: 18 months