Skroutz.mt

Bastian One Baby Car Seat i-Size with Isofix Black Carbon
Baby Car Seats

Bastian One Baby Car Seat i-Size with Isofix Black Carbon Code: 5903771707367

The Lionelo Bastian One car seat rotates 360° on the EasyTurn base and can be installed rear-facing or forward-facing for children measuring 40 to 150 cm tall. The backrest adjusts to 4 recline...

The Lionelo Bastian One car seat rotates 360° on the EasyTurn base and can be installed rear-facing or forward-facing for children measuring 40 to 150 cm tall. The backrest adjusts to 4 recline positions, while the headrest has 13 height settings that simultaneously adjust the height of the internal harness. The seat is approved under i-Size and R129/03.

...

See full description See full description

Top specs

  • Orientation

    This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

    Forward

    The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.

    Rear

    The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
  • Suitable for Height 40-150 cm
  • Seat Weight 12 kg
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Lionelo Bastian One car seat rotates 360° on the EasyTurn base and can be installed rear-facing or forward-facing for children measuring 40 to 150 cm tall. The backrest adjusts to 4 recline positions, while the headrest has 13 height settings that simultaneously adjust the height of the internal harness. The seat is approved under i-Size and R129/03.

Installation is via ISOFIX and Top Tether, while older children use the vehicle’s seat belt. Indicators at the attachment points show whether the seat is installed correctly, changing from red to green. The headrest is padded with Memory Foam, while the wide seat is covered with EPE foam and includes a reducer insert with the DriSeat system. The internal harness can be tightened with one hand and has non-slip covers.

  • Category: i-Size
  • Child height: 40–150 cm
  • Orientation: Forward-facing and rear-facing
  • Rotation: 360°
  • Recline: 4 positions
  • Headrest adjustment: 13 levels
  • Installation: ISOFIX and Top Tether or vehicle seat belt
  • Correct installation indicator: Changes color from red to green
  • Side-impact protection: Advanced
  • Materials: Memory Foam, EPE foam and a fiberglass-reinforced base
  • Insert: Reducer insert with DriSeat system
  • Harness covers: Non-slip
  • Washing: At 30°C
  • Dimensions: 43 × 52 × 63–77 cm
  • Weight: 12 kg
  • Color: Black
  • Standard: ECE R129/03

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
5903771707367

General Information

Facing
Forward, Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Forward

The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Seat Weight
12 kg
Colour
Black

Age group

Child Height
40-150 cm

Details

Manufacturer Colour
Black Carbon
Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
Yes

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
Yes

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Lionelo Bastian One car seat rotates 360° on the EasyTurn base and can be installed rear-facing or forward-facing for children measuring 40 to 150 cm tall. The backrest adjusts to 4 recline positions, while the headrest has 13 height settings that simultaneously adjust the height of the internal harness. The seat is approved under i-Size and R129/03.

Installation is via ISOFIX and Top Tether, while older children use the vehicle’s seat belt. Indicators at the attachment points show whether the seat is installed correctly, changing from red to green. The headrest is padded with Memory Foam, while the wide seat is covered with EPE foam and includes a reducer insert with the DriSeat system. The internal harness can be tightened with one hand and has non-slip covers.

  • Category: i-Size
  • Child height: 40–150 cm
  • Orientation: Forward-facing and rear-facing
  • Rotation: 360°
  • Recline: 4 positions
  • Headrest adjustment: 13 levels
  • Installation: ISOFIX and Top Tether or vehicle seat belt
  • Correct installation indicator: Changes color from red to green
  • Side-impact protection: Advanced
  • Materials: Memory Foam, EPE foam and a fiberglass-reinforced base
  • Insert: Reducer insert with DriSeat system
  • Harness covers: Non-slip
  • Washing: At 30°C
  • Dimensions: 43 × 52 × 63–77 cm
  • Weight: 12 kg
  • Color: Black
  • Standard: ECE R129/03

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
5903771707367

General Information

Facing
Forward, Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Forward

The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Seat Weight
12 kg
Colour
Black

Age group

Child Height
40-150 cm

Details

Manufacturer Colour
Black Carbon
Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
Yes

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
Yes

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

229,99 €
80,00 €   shipping cost
Lionelo