The Orno OR-CR-254/B wired infrared motion sensor features two separate detectors: one detects movement up to 12 m away at an angle of 180°, while the other provides close-range detection with a 360° angle. It is wall-mounted and can be adjusted both vertically and horizontally.
Light sensitivity can be adjusted from 3 to 2000 lux for daytime or nighttime operation, while the activation time can be set from 10 seconds to 15 minutes. Power consumption is 0.5 W/0.1 W.
- Detection type: Infrared
- Connection: Wired
- Mounting: Wall-mounted
- Detection angle: 180° and 360°
- Range: Up to 12 m
- Protection rating: IP65
- Maximum connected load: 1200 W for halogen loads and 300 W for LED loads
- Power consumption: 0.5 W/0.1 W
- Light sensitivity: 3–2000 lux
- Activation time: 10 seconds–15 minutes
- Mounting height: 1.8–2.5 m
- Operating temperature: -20 °C to +40 °C
Specifications
- Detection Type
- Infrared
- Detection Angle
- 360 °
- Protection Certification
- IP65
- Scope
- 12 m
- Connector
- Wired
- Battery
- No
Additional Features
- Antimasking
- No
- Tamper
- No
- Curtain
- No
- Placement
- Wall
- Recessed
- No
- PET
- No
- Built-in Camera
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.