The Azdome AZD-JYX05 car power cable kit connects a dash cam to the battery via the fuse box, keeping it powered when the engine is off and supporting 24-hour parking mode. It automatically detects a 12 V or 24 V input and cuts power to the camera when the voltage stays below the selected level for more than 8 seconds.
It is compatible with most dash cams featuring a mini USB power port. Low-voltage protection offers four settings for a 12 V battery and four for a 24 V battery. If no setting is selected, or two or more settings are selected simultaneously, the default cutoff voltage applies.
- Type: Power cable
- Cable set: 1
- Input voltage: 12 V or 24 V
- Low-voltage protection settings: 11.8 V, 12.0 V, 12.2 V and 12.4 V for a 12 V battery; 23.6 V, 24.0 V, 24.4 V and 24.8 V for a 24 V battery
- Default cutoff voltage: 11.8 V for a 12 V battery and 23.6 V for a 24 V battery
- Cutoff time: More than 8 seconds below the selected voltage
- Protections: Reverse polarity, short circuit, overload and overheating
- Overheat protection temperature: Above 130 °C, with reset at 90 °C
- Total cable length: 3.5 m
- Input cable length: 0.8 m
- Output cable length: 2.7 m
- Output connector: Right-angle mini USB
- Output voltage: DC 5 V
- Output current: 2.5 A
- Operating temperature: From -20 °C to 90 °C
- Product Number
- AZD-JYX05
- Cable Type
- Power
- Set
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.