Skroutz.mt

BeSafe IZi Modular A X1 Baby Car Seat i-Size with Isofix Metallic Melange 0-18 kg
Baby Car Seats

BeSafe IZi Modular A X1 Baby Car Seat i-Size with Isofix Metallic Melange 0-18 kg Code: 2001-11008693-MEM

The base can be extended in length, allowing a child up to approximately 4 years old (105 cm in height) to travel rear-facing, which we know is 5 times safer.

The additional SIP+ insert offers maximum...

The base can be extended in length, allowing a child up to approximately 4 years old (105 cm in height) to travel rear-facing, which we know is 5 times safer.

The additional SIP+ insert offers maximum side protection according to the new i-Size standard. The seat features excellent recline for the child's sleeping moments. Additionally, the belts remain open...

See full description See full description

  • Orientation

    This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

    Rear

    The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
  • Suitable for Weight 0-18 kg

  • Swedish Plus Test

    Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
  • Suitable for Height 61-105 cm

  • Number of Harness Attachment Points

    Shows how many points the car seat belt fastens.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The base can be extended in length, allowing a child up to approximately 4 years old (105 cm in height) to travel rear-facing, which we know is 5 times safer.

The additional SIP+ insert offers maximum side protection according to the new i-Size standard. The seat features excellent recline for the child's sleeping moments. Additionally, the belts remain open thanks to the magnets, making it very easy to place the child in the seat.

Finally, the exceptionally designed iZi Modular seat, combined with the i-Size base for Modular, requires very little space in the car, making rear-facing use possible even in cars with limited cabin space.

The i-Size base for Modular is sold separately.

Safety and Comfort on the Journey

The BeSafe iZi Modular A X1 i-Size Peak Mesh redefines everyday travel, combining top Scandinavian safety with a global innovation that frees parents' hands. The distinctive letter "A" in its title signifies the presence of the Active Retract Harness, the unique harness system with internal pretensioners that continuously "pull" the straps inward. This means that parents simply place the straps over the child's shoulders, and the seat automatically ensures the correct and tight fit, almost completely eliminating the risk of loose fastening.

Safety is further enhanced with the Dynamic Force Absorber, an advanced construction in the headrest that optimally absorbs forces in the event of a side collision, acting like a protective trampoline for the child's sensitive head. Additionally, the extra accessory SIP+ (Side Impact Protection) easily snaps onto the side of the seat, reducing the distance from the door and providing extra shielding.

Designed to offer comfort even on the hottest days, the seat features the Peak Mesh fabric technology. Its special three-dimensional structure allows optimal air circulation, preventing sweating and keeping the child cool and calm. The Ergo-Move Shoulder Pads provide more freedom of movement for the arms, while the adjustable legroom (in combination with the Modular i-Size base) allows the child to travel with maximum safety facing backward (rear-facing) for a longer period, up to around 4 years of age.

Swedish Plus Test & Neck Protection

This particular seat has successfully passed the Swedish Plus Test, which is internationally recognized as the strictest crash test standard.
Unlike conventional tests, the Plus Test does not simply check if the seat restrains the child, but precisely measures the pressure exerted on the sensitive child’s neck during a collision.
The limits it sets are so strict that only rear-facing seats can meet them, ensuring that in the event of an accident, the child's head and neck are fully protected from serious injuries.

Functional Features & Convenience

  • Innovative Peak Mesh fabric with three-dimensional weaving for maximum breathability
  • Ergo-Move Shoulder Pads system that offers more arm movement space
  • Magnetic Magnetic Belt Assistants that keep the belts open for easy installation
  • Adjustable 10-position headrest that follows the child's growth
  • Multiple recline positions for comfortable sleeping
  • Easy movement of the SIP+ (Side Impact Protection) with sliding in special slots

Technical Specifications & Safety

  • Safety certification UN R129 (i-Size)
  • Suitable for child height 61 to 105 cm rear-facing
  • Possibility of forward-facing installation from 88 to 105 cm
  • Maximum child weight 18 kg
  • Installation exclusively via ISOFIX with the iZi Modular i-Size base
  • Integrated side impact protection SPS and additional SIP+
  • Active Retract Harness belt system for automatic tightening
  • Dynamic Force Absorber technology for head protection

Instructions for Use & Maintenance

  • The seat must always be used in combination with the compatible iZi Modular base
  • The fabrics are removable and washable according to the manufacturer's instructions
  • It is recommended to use rear-facing until the age of 4 for maximum safety

Awards

  • Award-winning design and ergonomics from the AGR organization for back health
  • Baby Innovation Award distinction for the Active Retract Harness system

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
2001-11008693-MEM

General Information

Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
5

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Colour
Black

Age group

Weight Group
0-18 kg
Age Group
Group 0, Group 0+, Group 1

Age Group

The age groups indicate the ages and weights that the seat can support. In many cases, the seat can support more than one age group.

Group 0
The age group 0 pertains to newborns up to 6 or 9 months old, weighing from 0 to 10 kilograms.
Group 0+
The age group 0+, refers to newborns up to 12 or up to 15 months old, weighing from 0 to 13 kilograms.
Group 1
Age group 1 includes children from 9 months to 4 years old, weighing between 9 and 18 kilograms.
Maximum Child Age
4 years
Child Height
61-105 cm

Details

Manufacturer Colour
Metallic Melange
Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
Yes
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
Yes

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
No

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The base can be extended in length, allowing a child up to approximately 4 years old (105 cm in height) to travel rear-facing, which we know is 5 times safer.

The additional SIP+ insert offers maximum side protection according to the new i-Size standard. The seat features excellent recline for the child's sleeping moments. Additionally, the belts remain open thanks to the magnets, making it very easy to place the child in the seat.

Finally, the exceptionally designed iZi Modular seat, combined with the i-Size base for Modular, requires very little space in the car, making rear-facing use possible even in cars with limited cabin space.

The i-Size base for Modular is sold separately.

Safety and Comfort on the Journey

The BeSafe iZi Modular A X1 i-Size Peak Mesh redefines everyday travel, combining top Scandinavian safety with a global innovation that frees parents' hands. The distinctive letter "A" in its title signifies the presence of the Active Retract Harness, the unique harness system with internal pretensioners that continuously "pull" the straps inward. This means that parents simply place the straps over the child's shoulders, and the seat automatically ensures the correct and tight fit, almost completely eliminating the risk of loose fastening.

Safety is further enhanced with the Dynamic Force Absorber, an advanced construction in the headrest that optimally absorbs forces in the event of a side collision, acting like a protective trampoline for the child's sensitive head. Additionally, the extra accessory SIP+ (Side Impact Protection) easily snaps onto the side of the seat, reducing the distance from the door and providing extra shielding.

Designed to offer comfort even on the hottest days, the seat features the Peak Mesh fabric technology. Its special three-dimensional structure allows optimal air circulation, preventing sweating and keeping the child cool and calm. The Ergo-Move Shoulder Pads provide more freedom of movement for the arms, while the adjustable legroom (in combination with the Modular i-Size base) allows the child to travel with maximum safety facing backward (rear-facing) for a longer period, up to around 4 years of age.

Swedish Plus Test & Neck Protection

This particular seat has successfully passed the Swedish Plus Test, which is internationally recognized as the strictest crash test standard.
Unlike conventional tests, the Plus Test does not simply check if the seat restrains the child, but precisely measures the pressure exerted on the sensitive child’s neck during a collision.
The limits it sets are so strict that only rear-facing seats can meet them, ensuring that in the event of an accident, the child's head and neck are fully protected from serious injuries.

Functional Features & Convenience

  • Innovative Peak Mesh fabric with three-dimensional weaving for maximum breathability
  • Ergo-Move Shoulder Pads system that offers more arm movement space
  • Magnetic Magnetic Belt Assistants that keep the belts open for easy installation
  • Adjustable 10-position headrest that follows the child's growth
  • Multiple recline positions for comfortable sleeping
  • Easy movement of the SIP+ (Side Impact Protection) with sliding in special slots

Technical Specifications & Safety

  • Safety certification UN R129 (i-Size)
  • Suitable for child height 61 to 105 cm rear-facing
  • Possibility of forward-facing installation from 88 to 105 cm
  • Maximum child weight 18 kg
  • Installation exclusively via ISOFIX with the iZi Modular i-Size base
  • Integrated side impact protection SPS and additional SIP+
  • Active Retract Harness belt system for automatic tightening
  • Dynamic Force Absorber technology for head protection

Instructions for Use & Maintenance

  • The seat must always be used in combination with the compatible iZi Modular base
  • The fabrics are removable and washable according to the manufacturer's instructions
  • It is recommended to use rear-facing until the age of 4 for maximum safety

Awards

  • Award-winning design and ergonomics from the AGR organization for back health
  • Baby Innovation Award distinction for the Active Retract Harness system

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
2001-11008693-MEM

General Information

Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
5

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Colour
Black

Age group

Weight Group
0-18 kg
Age Group
Group 0, Group 0+, Group 1

Age Group

The age groups indicate the ages and weights that the seat can support. In many cases, the seat can support more than one age group.

Group 0
The age group 0 pertains to newborns up to 6 or 9 months old, weighing from 0 to 10 kilograms.
Group 0+
The age group 0+, refers to newborns up to 12 or up to 15 months old, weighing from 0 to 13 kilograms.
Group 1
Age group 1 includes children from 9 months to 4 years old, weighing between 9 and 18 kilograms.
Maximum Child Age
4 years
Child Height
61-105 cm

Details

Manufacturer Colour
Metallic Melange
Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
Yes
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
Yes

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
No

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.