Sika AnchorFix-1 is a fast-curing chemical anchoring adhesive for securing screws, threaded rods, bars, reinforcement bars and anchor bolts in concrete, masonry, stone and rock. The two-component resin is polyester-based and contains no styrene or solvents. It can be applied with a standard caulking gun and cures quickly, even at low temperatures.
It is suitable for anchoring in non-cracked concrete and solid or hollow masonry. Its non-sag formulation stays in place during application, even on ceilings, and can support high loads without slipping.
- Type: Chemical anchor
- Packaging: Cartridge
- Volume: 300 ml
- Colour: Grey
- Property: Adhesive
- Curing: Fast
- Components: 2
- Base: Polyester
- Styrene: None
- Solvents: None
- Application materials: Concrete, masonry, stone and rock
- Application: With a standard caulking gun
- Application temperature: -10 °C to 40 °C
- Service temperature: -40 °C to 50 °C
- Short-term service temperature: Up to 80 °C for 1–2 hours
- Working time: 4–30 minutes, depending on temperature
- Curing time: 35 minutes–24 hours, depending on temperature
- Layer thickness: Up to 3 mm
- Density: Approximately 1.63 kg/l
- Compressive strength: Approximately 60 N/mm² after 7 days at 20 °C (ASTM D 695)
- Compressive modulus of elasticity: Approximately 3 500 N/mm² after 7 days at 20 °C (ASTM D 695)
- Flexural tensile strength: Approximately 28 N/mm² after 7 days at 20 °C (ASTM D 790)
- Tensile strength: Approximately 12 N/mm² after 7 days at 20 °C (ASTM D 638)
- Approvals: ETA for anchoring in non-cracked concrete and solid or hollow masonry
- Compliance: LEED v2009 IEQc 4.1 Low Emitting Materials—Adhesives and Sealants, product category “Architectural Applications, Multipurpose construction adhesive”
- Certifications: CE marking and Declaration of Performance in accordance with ETAG 029, 2013 edition, based on ETA 17/0179 dated 27/02/2017, and in accordance with EAD 330499-00-0601, based on ETA-13/0720 dated 18/05/2018
- Product Number
- 497952
Dimensions
- Type
- Chemical Sealant
- Packaging
- Cartridge
- Colour
- Grey
Attributes
- Adhesive
- Yes
- Mold Resistant
- No
- for Wood
- No
- High Temperature
- Yes
- Aquarium
- No
- Acrylic
- No
- Polyurethane
- No
Quantity
- Mass Gaining
- 300 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.