Skroutz.mt

Shelly Qubino Pro 2 WavePro2 Electrical Panel Push Button Switch 240V 25A
Electrical Panel Push Buttons Switches

Shelly Qubino Pro 2 WavePro2 Electrical Panel Push Button Switch 240V 25A

The Shelly Qubino Pro 2 DIN-rail switch controls two circuits via Z-Wave and mounts on a standard DIN rail. Its two outputs have potential-free contacts and support loads of up to 16 A per channel,...

The Shelly Qubino Pro 2 DIN-rail switch controls two circuits via Z-Wave and mounts on a standard DIN rail. Its two outputs have potential-free contacts and support loads of up to 16 A per channel, with a maximum total current of 25 A. It can be used to control lighting, heating, ventilation, and other electrical appliances, as well as to create schedules...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The Shelly Qubino Pro 2 DIN-rail switch controls two circuits via Z-Wave and mounts on a standard DIN rail. Its two outputs have potential-free contacts and support loads of up to 16 A per channel, with a maximum total current of 25 A. It can be used to control lighting, heating, ventilation, and other electrical appliances, as well as to create schedules and automated scenes.

It uses a Z-Wave S800 processor and operates as a Z-Wave repeater. SmartStart automatic configuration and over-the-air firmware updates are also supported. A Z-Wave gateway, which is not included, is required for network configuration and control.

  • Type: 2-channel smart DIN-rail switch
  • Mounting: DIN rail
  • Communication protocol: Z-Wave
  • Processor: Z-Wave S800
  • Outputs: 2
  • Contacts: Potential-free
  • Phase control: 2
  • Supply voltage: 110–240 V AC, 50/60 Hz
  • Rated voltage: 240 V
  • Maximum AC switching voltage: 240 V
  • Maximum AC switching current: 16 A per channel, 25 A total
  • Power consumption: <0.3 W
  • Overheating protection: Yes
  • Power measurement: No
  • Z-Wave repeater: Yes
  • Configuration: SmartStart
  • Firmware updates: Over the air
  • Range: Up to 40 m indoors
  • Z-Wave frequency bands: 921.4 MHz, 908.4 MHz, 916 MHz, 919.8 MHz, 922.5 MHz, 919.7–921.7–923.7 MHz, 868.1 MHz, 920.9 MHz, 868.4 MHz
  • Maximum transmission power: <25 mW
  • Dimensions: 94 × 19 × 69 ±0.5 mm
  • Weight: 73 g
  • Housing material: Plastic
  • Color: Gray
  • Operating temperature: -20°C to 40°C
  • Operating humidity: 30% to 70% RH
  • Maximum operating altitude: 2000 m

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Nominal Voltage
240 V
Rated Voltage
25 A

Features & Functions

WiFi
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

61,26 €
14,00 €   shipping cost