Skroutz.mt

LS2 MX708 Fast II Motorcycle Helmet Motocross ECE 22.06 1050gr
Motorcycle Helmets

LS2 MX708 Fast II Motorcycle Helmet Motocross ECE 22.06 1050gr Code: MX708-02

Helmet LS2 MX FAST II MX 708 BLACK MATT ECE 22.06 offroad KPA.

  • DEPS EPS
  • LS2 INTERCOM (bluetooth Cardo)
  • Manual screws for the peak
  • Adjustable peak

Helmet LS2 MX FAST II MX 708 BLACK MATT ECE 22.06 offroad KPA.

  • DEPS EPS
  • LS2 INTERCOM (bluetooth Cardo)
  • Manual screws for the peak
  • Adjustable peak
See Description & Specifications See Description & Specifications

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt

Size

LS2 size guide
LS2 size guide

Size

LS2 size guide
International

Reviews (6)

Reviews

4.5
6
4.5
Review this product
  1. 4
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Ventilation
  • Visibility
  • Weight
  • Value for money
  • Application
  • Construction quality
  • High aerodynamic noise
Product report

Description & Specifications

Helmet LS2 MX FAST II MX 708 BLACK MATT ECE 22.06 offroad KPA.

  • DEPS EPS
  • LS2 INTERCOM (bluetooth Cardo)
  • Manual screws for the peak
  • Adjustable peak

KPA Shell for Maximum Protection and Lightness

The shell of the MX708 FAST II is made from KPA (Kinetic Polymer Alloy), a blend of polymers and aramid fibers that offers excellent impact absorption and low weight. Combined with the Multi-Density EPS inner lining, the helmet provides strategic protection by effectively distributing impact energy. The use of the Metal Security Plate further reinforces the connection of the strap to the shell, adding extra sturdiness.

Advanced Channelled EPS Ventilation System

Designed for intense off-road use, the helmet features a comprehensive ventilation system with multiple top air intakes and chin vents. Air circulates internally through channels in the EPS (Channelled EPS) and exits through multiple exhaust ports at the rear, keeping the rider cool. This continuous airflow is essential for maintaining comfort during demanding rides on rough terrain.

Racing Safety and Ergonomics

The rider's safety is a priority, which is why the MX708 FAST II is equipped with the classic and secure Double D Ring fastening, preferred in racing conditions. The Emergency Release system allows for immediate removal of the pads in case of emergency, making the rescuers' job easier. The reinforced chin strap ensures that the helmet will remain securely in place, regardless of vibrations and track challenges.

Internal Comfort and Laser-Cut Foam

The interior of the helmet is lined with Laser-Cut Foam, offering a precise and anatomical fit that embraces the face without applying unnecessary pressure. The lining is made from hypoallergenic and breathable materials, and is fully removable and washable to maintain hygiene after every use in the dirt. Additionally, the helmet is ready for the installation of an intercom system (Ready for LS2 INTERCOM), meeting the needs of modern riders.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
MX708-02

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1050 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Intercom Support
Yes

Intercom Support

The helmet features space for the installation and support of intercom, such as for a speaker, cable, and microphone, so as not to create pressure on the head. 

It is usually very useful for long trips where riders want to have communication during the ride.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (6)

4.5
6
4.5
Review this product
  1. 4
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Ventilation
  • Visibility
  • Weight
  • Value for money
  • Application
  • Construction quality
  • High aerodynamic noise
109,00 €
26,00 €   shipping cost