The Teletek SensoMAG8PPLUS stand-alone fire alarm control panel supports 8 zones and can be expanded to 16. Up to 512 detectors can be connected, along with an unlimited number of manual call points. The detector double-knock function, which requires two activations within a specified time, helps prevent false alarms.

It supports up to 8 sounders across 2 outputs, as well as sounder and relay expansion modules. The event card provides a sounder activation delay of 1 to 10 min. The end-of-line (EOL) resistor enables continuous monitoring of the inputs, while the key-locked front panel provides 2 access levels. No programming is required. The panel can be connected to a dialler to transmit signals to a monitoring centre. An app provides fault and fire notifications, as well as remote control. It is certified to the European standards EN54-2/4.

• Type: Fire alarm control panel
• Stand-alone: Yes
• Zones: 8, expandable to 16
• Detectors: Up to 512
• Manual call points: Unlimited
• Sounders: Up to 8 across 2 outputs
• Detector function: Double-knock activation within a specified time
• Expansion modules: Sounder and relay modules
• Sounder activation delay: 1–10 min
• Input monitoring: End-of-line (EOL) resistor
• Access levels: 2, with a key-locked front panel
• Programming: Not required
• Connection: Dialler for transmitting signals to a monitoring centre
• Remote control: Via app
• App notifications: Fault and fire
• Standards: EN54-2/4
• Power supply: 230 VAC ± 10%
• Fuse: 0.63 A
• Auxiliary output: 24 VDC / 0.3 A
• Battery: 12 V / 18 Ah, not included
• Operating temperature: -5 °C to +40 °C
• Weight without battery: Approximately 4 kg
• Metal back box dimensions: 441 × 331 × 80 mm
• Plastic cover dimensions: 461 × 344 × 45 mm