Skroutz.mt

Plus Plus Pool Water Pump Filter Three-Phase with Power 3hp
Pool Water Pumps

Plus Plus Pool Water Pump Filter Three-Phase with Power 3hp

POOL PUMP WITH PREFILTER

Automatic suction, centrifugal pump with a prefilter suitable for the circulation and filtration of the pool, especially where high flow rate is required. Recommended for...

POOL PUMP WITH PREFILTER

Automatic suction, centrifugal pump with a prefilter suitable for the circulation and filtration of the pool, especially where high flow rate is required. Recommended for pools up to 180m3.

The installation must be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: POOL 30T
  • Pump Type: Pool
  • Power Supply:...
See full description See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Large Residential (90 to 140 m³)

  • Power Supply

    Three-Phase

    Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • Pump Weight 5.5 kg
  • See all
Product report

Description

Description

POOL PUMP WITH PREFILTER

Automatic suction, centrifugal pump with a prefilter suitable for the circulation and filtration of the pool, especially where high flow rate is required. Recommended for pools up to 180m3.

The installation must be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: POOL 30T
  • Pump Type: Pool
  • Power Supply: Electric Current
  • Power (hp-Watt): 3Hp-2200Watt
  • Voltage (Volt): 380 Volt/50 Hz
  • Inlet Diameter Φ (Inch-mm): 2"-50mm
  • Outlet Diameter Φ (Inch-mm): 2"-50mm
  • Max Head (M): 20
  • Max Flow Rate (m3/h): 30

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
3 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
2200 W
Power Source
Three-Phase

Power Source

Three-Phase

Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Large Residential (90 to 140 m³)
Pump Weight
5.5 kg
Filter Included
No

Performance

Maximum Head of a Pump
20 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
50 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

3.0
2
3.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product

Description & Specifications

POOL PUMP WITH PREFILTER

Automatic suction, centrifugal pump with a prefilter suitable for the circulation and filtration of the pool, especially where high flow rate is required. Recommended for pools up to 180m3.

The installation must be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: POOL 30T
  • Pump Type: Pool
  • Power Supply: Electric Current
  • Power (hp-Watt): 3Hp-2200Watt
  • Voltage (Volt): 380 Volt/50 Hz
  • Inlet Diameter Φ (Inch-mm): 2"-50mm
  • Outlet Diameter Φ (Inch-mm): 2"-50mm
  • Max Head (M): 20
  • Max Flow Rate (m3/h): 30

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
3 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
2200 W
Power Source
Three-Phase

Power Source

Three-Phase

Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Large Residential (90 to 140 m³)
Pump Weight
5.5 kg
Filter Included
No

Performance

Maximum Head of a Pump
20 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
50 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

3.0
2
3.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
185,28 €
23,00 €   shipping cost