Technicqll 3383# construction adhesive bonds most types of rubber and is suitable for repairing bicycle inner tubes and leaks in rubber hoses. It can also be used on coated materials and rubber derivatives. It forms a flexible bond that withstands changing weather conditions and temperatures from -30 °C to +70 °C.
To bond, clean, degrease and dry the surfaces. Apply a thin layer of adhesive to both parts and leave for approximately 10 minutes to allow the solvent to evaporate. Then join the parts without moving them and press firmly. For patch repairs, the patch should be oval, have no sharp edges and be at least 1 cm larger than the tear. Bond strength depends on the pressure applied.
- Form: Liquid
- Quantity: 20 ml
- Pieces: 1
- Bonding materials: Rubber, coated materials and rubber derivatives
- Applications: Repairing bicycle inner tubes and leaks in rubber hoses
- Temperature resistance: From -30 °C to +70 °C
- Colour: Cream
- Density: 0.7 g/cm³
- Boiling point: 56 °C
- Flash point: -17 °C
- Lower explosion limit at 20 °C: 1.1% by volume
- Upper explosion limit at 100 °C: 7.5% by volume
- Water solubility: Insoluble
- Viscosity: 50–80 s, Ford cup 6 mm/50 cm³
- Storage: Store in a cool, dry place
Dimensions
- Form
- Liquid
- Epoxy
- No
- 2-Component
- No
- High Temperature
- No
- Pieces
- 1 pcs
Capacity
- Quantity
- 20 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.