Skroutz.mt

Zamel RF Single Channel Switch 5A
Intermediate Switches

Zamel RF Single Channel Switch 5A Code: SRP-02

Roller Controller 5A 230V AC 868.32MHz IP20 SRP-02

The SRP-02 roller controller enables the construction of window roller control systems, both in wired versions and using the wireless EXTA FREE...

Roller Controller 5A 230V AC 868.32MHz IP20 SRP-02

The SRP-02 roller controller enables the construction of window roller control systems, both in wired versions and using the wireless EXTA FREE control system. It is designed to allow control of any transmitter in the system and local control using a standard blind switch.

Product functional features:

  • ...
See full description See full description

Top specs

  • Connectivity

    RF

    Wireless control via radio frequencies.

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

    Roller shutters

    They allow remote control (up/down movement) of electric shutters and awnings.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

Roller Controller 5A 230V AC 868.32MHz IP20 SRP-02

The SRP-02 roller controller enables the construction of window roller control systems, both in wired versions and using the wireless EXTA FREE control system. It is designed to allow control of any transmitter in the system and local control using a standard blind switch.

Product functional features:

  • Compatibility with transmitters of the EXTA FREE wireless control system
  • Control of window blind operation
  • Ability for local wired control (using a blind switch)
  • Two comfort modes - up and down (ability to remember the position of the roller at a designated height)
  • Easy installation in a recessed 60 mm box or in the casing of a controlled drive
  • Long operating range (up to 250 meters)
  • Visual operation indicator
  • Low power consumption, ability for continuous operation
  • Possibility to increase the operating range using the repeater RTN-01

Technical specifications:

  • The rated supply voltage of the receiver is 230V AC
  • Frequency 868 MHz
  • Transmission coding with addressing
  • Number of receiver channels: 1
  • Operating range of the receiver 250m
  • Protection level of the receiver IP20
  • Maximum relay current 5A
  • Maximum relay voltage 250V AC
  • Maximum relay power 1250VA
  • Contacts 2 NO

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
SRP-02

Specifications

Number of Channels
1

Number of Channels

Indicates how many different lamps or devices the switch can control independently. For example, a 1-channel switch controls one lighting circuit, while a 4-channel switch can manage up to four different devices from the same unit.
Usage
Lighting, Roller shutters

Usage

Lighting

For remote control of lamps and lighting fixtures.

Roller shutters

They allow remote control (up/down movement) of electric shutters and awnings.

Smart Attributes

Connectivity
RF

Connectivity

RF

Wireless control via radio frequencies.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
5 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Roller Controller 5A 230V AC 868.32MHz IP20 SRP-02

The SRP-02 roller controller enables the construction of window roller control systems, both in wired versions and using the wireless EXTA FREE control system. It is designed to allow control of any transmitter in the system and local control using a standard blind switch.

Product functional features:

  • Compatibility with transmitters of the EXTA FREE wireless control system
  • Control of window blind operation
  • Ability for local wired control (using a blind switch)
  • Two comfort modes - up and down (ability to remember the position of the roller at a designated height)
  • Easy installation in a recessed 60 mm box or in the casing of a controlled drive
  • Long operating range (up to 250 meters)
  • Visual operation indicator
  • Low power consumption, ability for continuous operation
  • Possibility to increase the operating range using the repeater RTN-01

Technical specifications:

  • The rated supply voltage of the receiver is 230V AC
  • Frequency 868 MHz
  • Transmission coding with addressing
  • Number of receiver channels: 1
  • Operating range of the receiver 250m
  • Protection level of the receiver IP20
  • Maximum relay current 5A
  • Maximum relay voltage 250V AC
  • Maximum relay power 1250VA
  • Contacts 2 NO

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
SRP-02

Specifications

Number of Channels
1

Number of Channels

Indicates how many different lamps or devices the switch can control independently. For example, a 1-channel switch controls one lighting circuit, while a 4-channel switch can manage up to four different devices from the same unit.
Usage
Lighting, Roller shutters

Usage

Lighting

For remote control of lamps and lighting fixtures.

Roller shutters

They allow remote control (up/down movement) of electric shutters and awnings.

Smart Attributes

Connectivity
RF

Connectivity

RF

Wireless control via radio frequencies.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
5 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

61,90 €
14,00 €   shipping cost