Very good construction of the PC2525. More compact and lighter than the Nakayama PC3530.
It is powerful and has nerve. Its noise is a bit more intense than its predecessor, the PC3530.
It has a narrow carving blade with bearings and a chain thickness of 1.1mm.
The differences compared to the PC3530 are that to reduce the overall weight:
It has smaller fuel and chain oil tanks.
It has a thinner clutch.
None of the above is negative.
In terms of improvements:
It has better ergonomics in the angle of the handle and does not hurt the wrist and forearm after a long time of work, more stable grip.
It does not have a choke (which I removed from the PC3530) under the filter.
It only has the two screws for the blade and all other covers are snap-on, making access to the filter and spark plug easier.
Also, it does not come off with the side cover and the entire system with the brake handle.
It has a switch for the off function right on the handle (not double) for more immediate stopping in any situation, and additionally, it has a spring and is always in the on position, which means you will never pull the starter with closed currents and clog it.
It needs adjustment; at least my carburetor needed adjustment, it had a high idle, raised low, and lowered high, which made me think it had no power during the first cuts, even though it had nerve, the sound was like a rattle. After 4 tanks and adjusting the carburetor, the machine is dynamite. Smooth, without vibrations, instant, and torquey. With a very nice crisp sound. The carburetor has classic L and H screws for a screwdriver, unlike the PC3530 which requires special screwdrivers (for anyone who knows how to adjust them; those who don't know should not touch them and should consult someone with experience to avoid damaging the machine or later saying it won't start at all and stalls).
It has better filling caps on the tanks, unscrewing more easily by hand.
Simpler filter that snaps on rotationally.
The screw for the oil flow has been placed on top, double on the trigger, so you don't need to turn it upside down to adjust it.
For basic instructions for first start, break-in, etc., see my review on the Nakayama PC3530; it is the same.
It is VFM!!! Perfect for estate maintenance, firewood cutting, and tree pruning.
If someone wants it for logging, I would say the PC3530 is better due to its thicker 1.3mm chain and weight.
Πολύ καλή κατασκευή το PC2525. Πιο συμμαζεμένο και ελαφρύ από το nakayama PC3530.
Είναι δυνατό έχει νεύρο. Ο θόρυβος του είναι λίγο πιο έντονος από το προκάτοχο του το PC3530.
Έχει λάμα στενή carving με ρουλεμάν και αλυσίδα 1,1mm πάχος.
Οι διάφορες σε σχέση με το PC3530 είναι ότι για να μειωθεί το συνολικό βάρος:
Έχει μικρότερα ρεζερβουάρ καύσιμου και λαδιού αλυσίδας.
Έχει μικρότερο σε πάχος συμπλέκτη.
Κανένα από τα παραπάνω δεν είναι αρνητικό.
Στις βελτιώσεις:
Έχει καλύτερη εργονομία στην κλίση της λαβής και δεν πονάει ο καρπός και ο πήχης μετά από αρκετή ώρα εργασίας, πιο σταθερό κράτημα.
Δεν έχει πνίχτη (που τον έχω βγάλει από το PC3530) κάτω από το φίλτρο.
Έχει μόνο τις δυο βίδες τις λάμας και όλα τα άλλα καπάκια είναι κουμπωτά που κάνουν πιο εύκολη την πρόσβαση στο φίλτρο και στο μπουζί.
Επίσης δεν βγαίνει μαζί με το πλαϊνό καπάκι και όλο το σύστημα με τον χειροφυλακτήρα του φρένου.
Έχει διακόπτη για το σβήσιμο ακριβώς πάνω στην λαβή (όχι διπλά) για πιο άμεση παύση λειτουργίας σε οποιαδήποτε κατάσταση και επιπλέον έχει ελατηριάκι και είναι πάντα στη θέση on που σημαίνει πότε δεν θα τραβήξεις μιζιά με κλειστά ρεύματα και να μπουκώσει.
Χρειάζεται ρύθμισμα τουλάχιστον το δικό μου καρμπιρατέρ ήθελαν όλα ρύθμισμα είχε υψηλό ρελαντί, ανεβασμένα τα χαμηλά και χαμηλωμένο στα υψηλά, γεγονός που στις πρώτες κοψιές νόμιζα ότι δεν έχει δύναμη, αν και έβγαζε νεύρο, ο ήχος ήταν σαν κουδουνίστρα. Μετά από 4 ντεπόζιτα και ρύθμισμα του καρμπιρατέρ το μηχανάκι είναι δυναμίτης. Στρωμένο, χωρίς κραδασμούς, ακαριαίο και ροπάτο. Με έναν πολύ ωραίο τραγανό ήχο. Στο καρμπιρατέρ έχει κλασικές βίδες L και Η για κατσαβιδάκι όχι όπως το PC3530 που θέλει ειδικά κατσαβίδια (για όποιον ξέρει να τις ρυθμίσει, όποιος δεν ξέρει δεν τις αγγίζει και να απευθυνθεί σε κάποιον που με εμπειρία για να μην κάνει ζημιά στο μηχανάκι ή λέει μετά δεν παίρνει με τίποτα μπρος και σβήνει).
Έχει καλύτερες τάπες πλήρωσης στα ρεζερβουάρ, ξεβιδώνουν ποιο εύκολα με το χέρι.
Πιο απλό φίλτρο που κουμπώνει περιστροφικά.
Την βίδα για την ροή λαδιού την έχουν βάλει από πάνω διπλά στην σκανδάλη οπότε δεν χρειάζεται να το γυρνάς ανάσκελα να το ρυθμίσεις.
Για βασικές οδηγίες για πρώτη εκκίνηση, στρώσιμο κτλ δέστε στη αξιολόγηση μου στο nakayama PC3530, είναι το ίδιο.
Είναι VFM !!! τέλειο για περιποίηση κτήματος, τεμαχισμό καυσόξυλων και κλάδεμα δένδρων.
Αν το θέλει κάποιος και για υλοτομία καλύτερο θα έλεγα είναι το PC3530 λόγω πιο παχιάς αλυσίδας 1,3mm και βάρους.