Contains natural aggregates of appropriately graded particle size, polypropylene fibers, additive improving substances, and lightweight microspheres made from 100% recycled expanded glass (Recycled Glass Technology). These materials enhance workability, finish quality, and mechanical strengths. It is classified as an organic coating for exterior and interior use on masonry according to EN 15824.

• Dilution: 0%
• Consumption: 1.6-3.7Kg/m²
• Application Method: Metal trowel, thick material nozzle
• Drying: 1-2 hours

1. SUBSTRATE – PREPARATION:
   • The surface must be dry, clean, and free from dust, oils, salts, rust, unstable paints, and residues.
   • The surface should be as flat as possible. Large irregularities and cracks must be repaired with the appropriate repair materials.
   • Fresh concrete and gypsum surfaces are recommended to dry for at least 4 weeks before application.
   • For porous or already painted substrates, initially apply a layer of primer.
2. MIXING:
   • The product does not require the addition of mixing water.
   • Stir the product before use with a low-speed mechanical mixer.
3. APPLICATION:
   • After 24 hours from priming, apply one layer with a stainless steel trowel.
   • Shape the decorative texture using a plastic trowel.
4. CLEANING:
   • Tools must be cleaned immediately after application.
   • Remove as much material as possible from the tools before cleaning.

• Do not apply at temperatures below 5°C and above 35°C.
• Surfaces should be protected from sun, air, and rain with special protective covers.
• Surface drying time is 1-2 hours at 25°C.
• Minimum re-coating time is 24 hours at a temperature of 25°C.
• Full drying time is 14 days at a temperature of 25°C.
• Drying times are extended at lower temperatures.

• EAD 040083-00-0404
• EN 13501-1 (Fire Behavior: A2-s1,d0)
• EN 15824