Skroutz.mt

Solo Battery Powered Straight Sander with Speed Control YT-82824
Sanders

Solo Battery Powered Straight Sander with Speed Control YT-82824

The Yato YT-82824 straight grinder is powered by an 18 V battery and is used for metalworking, removing burrs from pipe edges, and chamfering. The speed can be adjusted from 8,000 to 26,000 rpm, and...

The Yato YT-82824 straight grinder is powered by an 18 V battery and is used for metalworking, removing burrs from pipe edges, and chamfering. The speed can be adjusted from 8,000 to 26,000 rpm, and the soft start helps the tool start gradually. The tool holder has a diameter of 6 mm.

  • Power source: Battery
  • Voltage: 18 V
  • Speed adjustment: 8,000–26,000 rpm
  • ...
See full description See full description

Top specs

  • Number of Batteries 0

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
  • Reception Diameter 6 mm
  • See all
67 30 €
Delivery Fri, 20 Nov - Thu, 26 Nov
14,00 €   shipping cost
Sent from Greece
From E-Garbis 4.4 (39)
4.4 (39 reviews)
Greece
4 pieces
See Power Tools on the page of E-Garbis

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Yato YT-82824 straight grinder is powered by an 18 V battery and is used for metalworking, removing burrs from pipe edges, and chamfering. The speed can be adjusted from 8,000 to 26,000 rpm, and the soft start helps the tool start gradually. The tool holder has a diameter of 6 mm.

  • Power source: Battery
  • Voltage: 18 V
  • Speed adjustment: 8,000–26,000 rpm
  • Tool holder diameter: 6 mm
  • Maximum accessory diameter: 25 mm
  • Thread: M15
  • Soft start: Yes
  • Weight: 1.37 kg
  • Protection rating: IPX0
  • Insulation class: III
  • Sound pressure: 78 ± 3 dB(A)
  • Sound power: 89 ± 3 dB(A)
  • Vibrations: 2.47 ± 1.5 m/s²
  • Battery: Li-Ion, 2 Ah
  • Package contents: Accessory fastening wrench

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Straight Sander

Type

Straight Sander
For smoothing in hard-to-reach areas with a rotary grinding head.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Socket Diameter
6 mm
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Yato YT-82824 straight grinder is powered by an 18 V battery and is used for metalworking, removing burrs from pipe edges, and chamfering. The speed can be adjusted from 8,000 to 26,000 rpm, and the soft start helps the tool start gradually. The tool holder has a diameter of 6 mm.

  • Power source: Battery
  • Voltage: 18 V
  • Speed adjustment: 8,000–26,000 rpm
  • Tool holder diameter: 6 mm
  • Maximum accessory diameter: 25 mm
  • Thread: M15
  • Soft start: Yes
  • Weight: 1.37 kg
  • Protection rating: IPX0
  • Insulation class: III
  • Sound pressure: 78 ± 3 dB(A)
  • Sound power: 89 ± 3 dB(A)
  • Vibrations: 2.47 ± 1.5 m/s²
  • Battery: Li-Ion, 2 Ah
  • Package contents: Accessory fastening wrench

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Straight Sander

Type

Straight Sander
For smoothing in hard-to-reach areas with a rotary grinding head.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Socket Diameter
6 mm
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

67,30 €
14,00 €   shipping cost
Yato