Description
Specifications
The TED Electric Transformer converts the voltage from 230-220V to 110-115V and is reversible with a power of 10000VA and 8000W. It is suitable for indoor use, in an environment free of corrosive, flammable, or explosive elements, and without conductive dust (it has an IP20 protection rating).
General Features- Dimensions (W x D x H): 335 x 220 x 230 mm
- Input Connection: Rail
- Output Connections: 3x USA plugs, Rail
- Input Voltage: 220V - 230V
- Output Voltage: 110V - 115V
- Frequency: 50Hz
- Reversible: Yes
- Place the TED Electric transformer in a stable, ventilated, and moisture-free area.
- Ensure that the electronic products (loads) you want to connect are turned off (OFF).
- Connect the loads to the transformer outlet.
- Connect the transformer to the power supply (220-230V).
- Turn on the loads (ON).
- The connection of the transformer to the power supply is made through a rail, using a minimum 3-wire cable of 1.5mm or 3 single-core wires of the same cross-section, which are not included.
- Follow the steps in the usage instructions exactly!
- In case of malfunction, do not attempt to repair the device yourself!
- To avoid overloading or surges, check the actual power of the load.
- Recommended for devices with a maximum consumption of 8000 Watts.
- For inductive loads (which require high current at startup), use a transformer 3 to 5 times larger than the load power.
- Type
- -
- Input Voltage
- 230 V
- Power
- 10000 VA
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.