The TED Electric Transformer converts voltage from 230-220V to 110-115V and is reversible with a power of 3000VA (2400W). It is suitable for indoor use in environments free of corrosive, flammable, or explosive materials, as well as free of conductive dust (protection grade IP20).

GENERAL CHARACTERISTICS

• Dimensions (L x W x H): 285 x 190 x 201 mm
• Input Connection: Relay
• Output Connections: 3x USA sockets, Relay
• Input Voltage: 220V - 230V
• Output Voltage: 110V - 115V
• Frequency: 50Hz
• Reversible: Yes

USAGE INSTRUCTIONS

• Place the TED Electric transformer in a flat and ventilated area free of moisture.
• Ensure that the electronic devices (loads) you want to connect are turned off (OFF).
• Connect the loads to the transformer's socket.
• Connect the transformer to the network (220-230V).
• Turn on the loads (ON).

WARNINGS

• The transformer connection to the network is done via a relay, using a 3-wire cable of at least 1.5mm or with 3 single wires of the same thickness, which are not included.
• Follow the steps of the usage instructions exactly!
• In case of malfunction, do not attempt to repair the device yourself!

RECOMMENDATIONS

• Recommended for devices with a maximum consumption of 8000 Watts.
• For inductive loads (which require high current at startup), use a transformer 3 to 5 times larger than the load's power.