Skroutz.mt

Eikon HCS20 Electret Microphone Clip On
Microphones

Eikon HCS20 Electret Microphone Clip On

EIKON instrument microphone by Proel HCS-20 with In-Line Preamp. The HCS20 is a clip-on microphone for wind instruments, which is placed on the bell of a trumpet, saxophone, trombone, tuba, or other...

EIKON instrument microphone by Proel HCS-20 with In-Line Preamp. The HCS20 is a clip-on microphone for wind instruments, which is placed on the bell of a trumpet, saxophone, trombone, tuba, or other wind instruments. Its cardioid polar pattern allows it to be used on stage in high SPL conditions, ensuring natural, clear, and strong sound.

It can be powered...

See full description See full description

  • Type (Directivity)

    Unidirectional (Cardioid)

    Cardioid: Captures sound primarily from the front, reducing sounds from the sides and rear. Ideal for vocals, podcasting, and live recordings.
  • Usage Musical Instruments
  • Placement Clip On
  • Connectivity XLR, mini XLR
  • See all
65 00 €
Delivery by Thu, 02 Jul
14,00 €   shipping cost
Sent from Greece
From Ihodomi 5.0 (4)
5.0 (4 reviews)
Greece
2 pieces
See Audio on the page of Ihodomi
Review the product
Product report

Description

Description

EIKON instrument microphone by Proel HCS-20 with In-Line Preamp. The HCS20 is a clip-on microphone for wind instruments, which is placed on the bell of a trumpet, saxophone, trombone, tuba, or other wind instruments. Its cardioid polar pattern allows it to be used on stage in high SPL conditions, ensuring natural, clear, and strong sound.

It can be powered directly via cable through the provided IN-LINE preamp or connected directly to a bodypack transmitter.

  • Miniature condenser microphone 8 mm with permanently polarized condenser capsule
  • Cardioid polar pattern
  • Phantom adapter included
  • Belt-pack transmitter compatible with mini XLR 3 pole plug
  • Built-in windscreen (additional external windscreen included)
  • Designed for stage use with instruments, specifically saxophone, clarinet, trombone, trumpet

Technical specifications:

  • Type: Back electret condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 50 - 16000 Hz
  • Sensitivity: -45dB
  • Max SPL for 1% THD: 130 dB
  • S/N Ratio: > 70 dB
  • Impedance: 2000 Ω ±30%
  • Power Requirement: 48 V Phantom Power
  • Cable: L 1000 x O 2 mm
  • Color: Black
  • Accessories: Windscreen

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Mode of Operation
Electret

Mode of Operation

Electret
Type of condenser with built-in charge. Small, lightweight, and affordable, commonly found in lavalier, headset, and portable devices.
Directivity
Unidirectional (Cardioid)

Directivity

Unidirectional (Cardioid)

Cardioid: Captures sound primarily from the front, reducing sounds from the sides and rear. Ideal for vocals, podcasting, and live recordings.
Impendance
2000 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Max SPL
130 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Signal-to-Noise Ratio (SNR)
70 dB

Signal-to-Noise Ratio (SNR)

Indicates the difference between the useful signal and the microphone's noise. The higher the value in dB, the clearer the sound. A microphone with a low SNR may sound “noisy,” especially in quiet environments or when recording low-volume sounds. On the other hand, a high SNR means that noise is minimal compared to the sound you want to capture, offering a more professional, clear, and detailed result—ideal for studio, vocals, or high-quality recording.

  • 35 – 60 dB (Low SNR): Noticeable noise is present. Suitable for casual use or loud sources.
  • 60 – 90 dB (Medium SNR): Good signal-to-noise balance. Suitable for live performances and general use.
  • 90 – 110 dB (High SNR): Very clear signal with minimal noise. Ideal for studio, vocals, and high-quality recording.
Connectivity
XLR, mini XLR

General Characteristics

Device Group
Musical Instruments
Placement
Clip On
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

EIKON instrument microphone by Proel HCS-20 with In-Line Preamp. The HCS20 is a clip-on microphone for wind instruments, which is placed on the bell of a trumpet, saxophone, trombone, tuba, or other wind instruments. Its cardioid polar pattern allows it to be used on stage in high SPL conditions, ensuring natural, clear, and strong sound.

It can be powered directly via cable through the provided IN-LINE preamp or connected directly to a bodypack transmitter.

  • Miniature condenser microphone 8 mm with permanently polarized condenser capsule
  • Cardioid polar pattern
  • Phantom adapter included
  • Belt-pack transmitter compatible with mini XLR 3 pole plug
  • Built-in windscreen (additional external windscreen included)
  • Designed for stage use with instruments, specifically saxophone, clarinet, trombone, trumpet

Technical specifications:

  • Type: Back electret condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 50 - 16000 Hz
  • Sensitivity: -45dB
  • Max SPL for 1% THD: 130 dB
  • S/N Ratio: > 70 dB
  • Impedance: 2000 Ω ±30%
  • Power Requirement: 48 V Phantom Power
  • Cable: L 1000 x O 2 mm
  • Color: Black
  • Accessories: Windscreen

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Mode of Operation
Electret

Mode of Operation

Electret
Type of condenser with built-in charge. Small, lightweight, and affordable, commonly found in lavalier, headset, and portable devices.
Directivity
Unidirectional (Cardioid)

Directivity

Unidirectional (Cardioid)

Cardioid: Captures sound primarily from the front, reducing sounds from the sides and rear. Ideal for vocals, podcasting, and live recordings.
Impendance
2000 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Max SPL
130 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Signal-to-Noise Ratio (SNR)
70 dB

Signal-to-Noise Ratio (SNR)

Indicates the difference between the useful signal and the microphone's noise. The higher the value in dB, the clearer the sound. A microphone with a low SNR may sound “noisy,” especially in quiet environments or when recording low-volume sounds. On the other hand, a high SNR means that noise is minimal compared to the sound you want to capture, offering a more professional, clear, and detailed result—ideal for studio, vocals, or high-quality recording.

  • 35 – 60 dB (Low SNR): Noticeable noise is present. Suitable for casual use or loud sources.
  • 60 – 90 dB (Medium SNR): Good signal-to-noise balance. Suitable for live performances and general use.
  • 90 – 110 dB (High SNR): Very clear signal with minimal noise. Ideal for studio, vocals, and high-quality recording.
Connectivity
XLR, mini XLR

General Characteristics

Device Group
Musical Instruments
Placement
Clip On
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

65,00 €
14,00 €   shipping cost