PolyTerra PLA is a bioplastic 3D printing filament that combines organic materials with PLA to reduce plastic content and develop a more environmentally friendly filament.

PolyTerra prints like PLA, without needing to change printing settings, and its bridging and overhang capabilities surpass even those of PLA. With a printing temperature range of 190 to 230 °C, PolyTerra can be processed in any extrusion-based 3D printer.

Recommended Settings:

• Nozzle Temperature: 190 – 230 °C
• Print Bed Temperature: 25 - 60 °C
• Print Speed: 30-70 mm/s
• Surface Material: BuildTak®, glass, blue tape
• Enclosure: ACTIVE

Key Data:

• Filament Type: PLA
• Diameter: 1.75 mm
• Weight: 1.00 kg
• Length: 317 m
• Color: Brown

Printing Parameters:

• Recommended Printing Temperature (Minimum): 190 °C
• Recommended Printing Temperature (Maximum): 230 °C
• Recommended Print Surface Temperature (Minimum): 25 °C
• Recommended Print Surface Temperature (Maximum): 60 °C
• Recommended Print Speed (Minimum): 30 mm/s
• Recommended Print Speed (Maximum): 70 mm/s
• Recommended Fan Speed (Maximum): 100 %
• Recommended Retraction (Minimum): 1 mm

General:

• Specific Weight: 1.31 g/cm3
• Vicat Softening Temperature: 62.7 °C
• Elongation at Break: 34.5 %
• Mechanical Strength: 39.6 MPa
• Flexural Modulus: 2695 MPa
• Impact Resistance: 5.7 KJ/m2