High-quality and reliable car inverter that helps convert 12V DC power into 230V AC power for electronic devices. It is suitable for charging devices such as: laptops, tablets, phones, and household electronic devices.

• Dimensions (L x W x H): 210 x 115 x 63 mm
• Input Voltage Range: 9.55V - 15.5V
• Continuous Output Capability: 240W
• 15-Minute Output Capability: 300W
• Maximum Capability: 600W
• Output Condition: 230V ±5% AC
• THD Distortion: < 3%
• Efficiency: 94.8% (70% LOAD)
• No Load Current: < 0.5A
• Output Connector: 1x Schuko, 1x USB
• 1x Air cooling fan
• Pure sine wave output

• Ensure that the sum of the power of the electronic devices you want to use does not exceed the rated power of the inverter.
• Before connecting, make sure that the inverter is turned off: Connect the black wire to the negative terminal of the battery and the red wire to the positive terminal of the battery.
• The inverter is equipped with a standard AC outlet. Connect the power cord of the device you want to use to the outlet and turn on the inverter, and then the devices.

• Low battery voltage: This condition is not dangerous for the inverter but may damage the power source.
• Overload protection: The inverter will automatically turn off when the input voltage exceeds the normal limit.
• Short circuit protection: The inverter will turn off. Remove the short circuit, and the inverter will reset.
• Overcharging protection: The inverter will automatically turn off when the power consumption exceeds the maximum rated output power.
• Overheating protection: When the temperature sensor inside the inverter reaches 75°C, the device will automatically shut down. In this case, wait at least 15 minutes before attempting to restart the inverter and always disconnect devices.
• In case of protection activation, the inverter will alert you with an audible notification and blinking LED.