High-quality and reliable car inverter that helps convert DC 12V to 230V power for electronic devices. Ideal for charging devices such as: laptops, tablets, phones, and home electronic appliances.

GENERAL FEATURES

• Dimensions (L x W x H): 210 x 115 x 63 mm
• Input Voltage Range: 9.55V - 15.5V
• Continuous Output Capacity: 400W
• 15-Minute Output Capacity: 500W
• Maximum Capacity: 1000W
• Output Voltage: 230V ±5% AC
• THD Distortion: < 3%
• Efficiency: 94.8% (70% LOAD)
• No Load Current: < 0.5A
• Output Connection: 1x Schuko, 1x USB
• 1x Air-cooled refrigerator
• Pure sine wave output

INSTALLATION

• Ensure that the total power of the electronic devices does not exceed the maximum continuous power of the inverter.
• Before connecting, make sure the inverter is turned off: connect the black wire to the positive terminal of the battery and the red wire to the negative.
• The inverter has a standard AC outlet for household use. Connect the power cord from the device to the outlet and turn on the inverter as well as the devices.

BUILT-IN PROTECTIONS

• Weak battery voltage: this condition is not dangerous for the inverter but may damage the power source.
• Overload protection: the inverter will automatically turn off when the input voltage exceeds the normal limit.
• Short circuit protection: the inverter will stop. Remove the short circuit and the inverter will reset.
• Overload condition protection: the inverter will automatically turn off when the current consumption exceeds the maximum rated output.
• Overheating protection: when the temperature sensor inside the inverter reaches 75°C, the device will automatically shut down. Wait at least 15 minutes before trying to restart the inverter and always disconnect the devices.
• If protections are activated, the inverter will alert you with an audible notification and flashing LED.