The TED Electric Transformer converts voltage from 230-220V to 110-115V and is reversible with a power of 8000VA (6400W). It is used indoors, in environments free of corrosive, flammable, or explosive agents, as well as without conductive dust (with protection degree IP20).

General Features:

• Dimensions (L x W x H): 335 x 220 x 230 mm
• Input Connection: Relay
• Output Connectors: 3x USA sockets, Relay
• Input Voltage: 220V - 230V
• Output Voltage: 110V - 115V
• Frequency: 50Hz
• Reversible: Yes

Usage Instructions:

• Place the TED Electric transformer in a stable, ventilated, and dry location.
• Make sure the electronic devices (loads) you intend to connect are turned off.
• Connect the loads to the socket of the transformer.
• Connect the transformer to the network (220-230V).
• Turn on the loads.

Warnings:

• The connection of the transformer to the network is done via the relay, adding a 3-wire cable with a minimum cross-section of 1.5mm or with 3 insulated wires of the same cross-section, which are not included.
• Follow the steps of the usage instructions closely!
• In case of malfunction, do not attempt to repair the device yourself!

Recommended:

• Recommended for devices with a consumption of up to 8000 Watts.
• For inductive loads (which require high starting current), use a transformer 3 to 5 times larger than the power of the load.