3D Printer Filament

Esun PLA Silk 1.75mm Gold 1kg 1pc (Spool) 3D Printer Filament Code: ePLA-Silk-P175J1

The eSun ePLA-Silk 3D printing filament has a silky sheen that gives printed objects a smooth, glossy, pearlescent appearance without the need for additional polishing. It is suitable for decorative...

The eSun ePLA-Silk 3D printing filament has a silky sheen that gives printed objects a smooth, glossy, pearlescent appearance without the need for additional polishing. It is suitable for decorative items, display models, craft projects, vases, and prototypes where appearance matters. It prints as easily as conventional PLA, with low shrinkage, reduced...

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
19 02 €
Delivery Fri, 27 Nov - Thu, 03 Dec
14,00 €   shipping cost
Sent from Greece
From GrShop 4.6 (42)
Greece
17 pieces
See Printer Supplies on the page of GrShop

Learn more about invoicing

Description

Description

The eSun ePLA-Silk 3D printing filament has a silky sheen that gives printed objects a smooth, glossy, pearlescent appearance without the need for additional polishing. It is suitable for decorative items, display models, craft projects, vases, and prototypes where appearance matters. It prints as easily as conventional PLA, with low shrinkage, reduced warping, and good layer adhesion.

The spool is designed for smooth feeding without filament tangles, while the material melts evenly for consistent printing. The support structure is easy to remove, and prints have a smooth surface.

  • Material: Silk-like PLA
  • Color: Gold
  • Diameter: 1.75 mm
  • Filament weight: 1 kg
  • Filament length: 344 m
  • Density: 1.21 g/cm³
  • Nozzle temperature: 190–230 °C
  • Heated bed temperature: 45–60 °C
  • Printing speed: 40–100 mm/s
  • Cooling fan speed: Up to 100%
  • Tensile strength: 65 MPa
  • Flexural modulus: 1447 MPa
  • Elongation at break: 14.4%
  • Impact strength: 5.86 KJ/m²

Manufacturer

See full description

Specifications

Specifications

Product Number
ePLA-Silk-P175J1
Material
PLA
Colour
Gold
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (23)

Reviews

  1. 16
  2. 2
  3. 2
  4. 1
  5. 2
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • shX

    Verified purchase

    This review is about the colour: Blue

    With a profile ready from Esun, it prints just fine!

    Translated from Greek ·
    Did you find this review helpful?
  • Digling

    Verified purchase

    This review is about the colour: Silver

    Very good material quality. Nice result. Minimal "stinging," I would call it more fuzz (maybe it could change with some printer adjustment), but nothing obvious or difficult to remove.

    Translated from Greek ·
    Did you find this review helpful?
  • Chris_Radical
    5
    1 out of 1 members found this review helpful

    Verified purchase

    Flawless printing and perfect color. The best I've tried so far in silk as well as PLA plus. The only downside with Esun is the cardboard spools that are not good for the Bambu's AMS. There are solutions, of course, ideally respool to Bambulab spools.

    Translated from Greek ·
    Did you find this review helpful?
  • Print3Dify
    3
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    I can't say much about all the esun threads, I haven't had any problems with whatever I've bought. But the rainbow one, in order to change color, you have to apply, very slow change and it has few colors inside, otherwise it prints fine.

    Translated from Greek ·
    Did you find this review helpful?
  • ospyros

    Verified purchase

    This review is about the colour: Silver

    Quite good print quality

    Translated from Greek ·
    Did you find this review helpful?
  • Phillip
    4
    4 out of 7 members found this review helpful
    This review is about the colour: Multicolour

    Very good quality material and quite shiny. However, the color changes at regular intervals. The prints, that is, do not come out in color, but perhaps one color changes per medium-sized print.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Pink

    very good quality

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    2 out of 2 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    Very good material quality. I didn't like the color change step, it's too big.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Bronze

  • Verified purchase

    This review is about the colour: White

  • Verified purchase

    This review is about the colour: Blue

  • Verified purchase

    This review is about the colour: Green

  • Verified purchase

    This review is about a variation of the product

  • This review is about the colour: Silver

  • Verified purchase

    This review is about a variation of the product

  • This review is about the colour: Blue

  • Verified purchase

    This review is about the colour: White

  • Verified purchase

    This review is about the colour: Pink

  • Verified purchase

    This review is about the colour: Multicolour

  • Verified purchase

    This review is about a variation of the product

  • Verified purchase

    This review is about the colour: White

  • Verified purchase

    This review is about the colour: White

  • With a profile ready from Esun, it prints just fine!

    Translated from Greek ·
    0
  • Very good material quality. Nice result. Minimal "stinging," I would call it more fuzz (maybe it could change with some printer adjustment), but nothing obvious or difficult to remove.

    Translated from Greek ·
    0
  • Flawless printing and perfect color. The best I've tried so far in silk as well as PLA plus. The only downside with Esun is the cardboard spools that are not good for the Bambu's AMS. There are solutions, of course, ideally respool to Bambulab spools.

    Translated from Greek ·
    1
  • I can't say much about all the esun threads, I haven't had any problems with whatever I've bought. But the rainbow one, in order to change color, you have to apply, very slow change and it has few colors inside, otherwise it prints fine.

    Translated from Greek ·
    1
  • See all

Description & Specifications

The eSun ePLA-Silk 3D printing filament has a silky sheen that gives printed objects a smooth, glossy, pearlescent appearance without the need for additional polishing. It is suitable for decorative items, display models, craft projects, vases, and prototypes where appearance matters. It prints as easily as conventional PLA, with low shrinkage, reduced warping, and good layer adhesion.

The spool is designed for smooth feeding without filament tangles, while the material melts evenly for consistent printing. The support structure is easy to remove, and prints have a smooth surface.

  • Material: Silk-like PLA
  • Color: Gold
  • Diameter: 1.75 mm
  • Filament weight: 1 kg
  • Filament length: 344 m
  • Density: 1.21 g/cm³
  • Nozzle temperature: 190–230 °C
  • Heated bed temperature: 45–60 °C
  • Printing speed: 40–100 mm/s
  • Cooling fan speed: Up to 100%
  • Tensile strength: 65 MPa
  • Flexural modulus: 1447 MPa
  • Elongation at break: 14.4%
  • Impact strength: 5.86 KJ/m²

Manufacturer

Product Number
ePLA-Silk-P175J1
Material
PLA
Colour
Gold
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (23)

  1. 16
  2. 2
  3. 2
  4. 1
  5. 2
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • shX

    Verified purchase

    This review is about the colour: Blue

    With a profile ready from Esun, it prints just fine!

    Translated from Greek ·
    Did you find this review helpful?
  • Digling

    Verified purchase

    This review is about the colour: Silver

    Very good material quality. Nice result. Minimal "stinging," I would call it more fuzz (maybe it could change with some printer adjustment), but nothing obvious or difficult to remove.

    Translated from Greek ·
    Did you find this review helpful?
  • Chris_Radical
    5
    1 out of 1 members found this review helpful

    Verified purchase

    Flawless printing and perfect color. The best I've tried so far in silk as well as PLA plus. The only downside with Esun is the cardboard spools that are not good for the Bambu's AMS. There are solutions, of course, ideally respool to Bambulab spools.

    Translated from Greek ·
    Did you find this review helpful?
  • Print3Dify
    3
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    I can't say much about all the esun threads, I haven't had any problems with whatever I've bought. But the rainbow one, in order to change color, you have to apply, very slow change and it has few colors inside, otherwise it prints fine.

    Translated from Greek ·
    Did you find this review helpful?
  • ospyros

    Verified purchase

    This review is about the colour: Silver

    Quite good print quality

    Translated from Greek ·
    Did you find this review helpful?
  • Phillip
    4
    4 out of 7 members found this review helpful
    This review is about the colour: Multicolour

    Very good quality material and quite shiny. However, the color changes at regular intervals. The prints, that is, do not come out in color, but perhaps one color changes per medium-sized print.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Pink

    very good quality

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    2 out of 2 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    Very good material quality. I didn't like the color change step, it's too big.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Bronze

  • Verified purchase

    This review is about the colour: White

  • Verified purchase

    This review is about the colour: Blue

  • Verified purchase

    This review is about the colour: Green

  • Verified purchase

    This review is about a variation of the product

  • This review is about the colour: Silver

  • Verified purchase

    This review is about a variation of the product

  • This review is about the colour: Blue

  • Verified purchase

    This review is about the colour: White

  • Verified purchase

    This review is about the colour: Pink

  • Verified purchase

    This review is about the colour: Multicolour

  • Verified purchase

    This review is about a variation of the product

  • Verified purchase

    This review is about the colour: White

  • Verified purchase

    This review is about the colour: White

  • With a profile ready from Esun, it prints just fine!

    Translated from Greek ·
    0
  • Very good material quality. Nice result. Minimal "stinging," I would call it more fuzz (maybe it could change with some printer adjustment), but nothing obvious or difficult to remove.

    Translated from Greek ·
    0
  • Flawless printing and perfect color. The best I've tried so far in silk as well as PLA plus. The only downside with Esun is the cardboard spools that are not good for the Bambu's AMS. There are solutions, of course, ideally respool to Bambulab spools.

    Translated from Greek ·
    1
  • I can't say much about all the esun threads, I haven't had any problems with whatever I've bought. But the rainbow one, in order to change color, you have to apply, very slow change and it has few colors inside, otherwise it prints fine.

    Translated from Greek ·
    1
  • See all
19,02 €
14,00 €   shipping cost