Description
Specifications
Kraft Total Proof elastomeric acrylic waterproofing is a brush-applied liquid membrane for concrete and cement screed roofs. It contains acrylic resins and 3D Fiber Technology fibers, while its elasticity helps seal cracks.
This water-based membrane is applied as a cold coating to horizontal surfaces. It is resistant to temperature fluctuations and weather conditions, offers high solar reflectance, and is classified in accordance with EN 1504-2.
- Quantity: 4 kg
- Color: White
- Type: Elastomeric acrylic waterproofing
- Form: Brush-applied liquid
- Application surface: Roof terrace
- Application surface material: Cement-based
- Ingredients: Acrylic resins and 3D Fiber Technology fibers
- Elongation at break: Over 400%
- Temperature resistance range: −15 °C to 80 °C
- Density: 1.30 g/mL (±0.05)
- Solids by weight: 58% (±2)
- Viscosity: 130 KU (±10)
- pH: 9.0 (±0.5)
- Shore A hardness: 50 (±10)
- Solar Reflectance Index (SRI): 109
- Dilution: 0–10%
- Total consumption: 1.0–1.5 kg/m²
- Consumption per coat: 0.500–0.750 kg/m²
- Surface drying time: Approximately 3 hours
- Drying time between coats: 16–24 hours
- Adhesion: Over 1.5 N/mm²
- Water absorption: Below 0.1 kg/m²·h^0.5
- Maximum VOC content: 39 g/L
- Classification standard: EN 1504-2
Product Details
- Type
- Lubricating Liquid
- Colour
- White
- Application Surface
- Terrace
- Application Surface Material
- Cementitious
Additional Specifications
- Polyurethane
- No
- Elastomer
- Yes
- Acrylic
- Yes
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Quantity
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.