Skroutz.mt

GloboStar LED Strip 12V RGBWW Light 5m Type SMD5050
LED Strips

GloboStar LED Strip 12V RGBWW Light 5m Type SMD5050 Code: 90773

Technical Data

  • Brand: GLOBOSTAR LED LIGHTING AND ACCESSORIES GROUP
  • Series: DIGITAL LIGHTING
  • Product Identification Code: 90773
  • Category/Type of Product: LED Digital Pixel Strips
  • Construction...

Technical Data

  • Brand: GLOBOSTAR LED LIGHTING AND ACCESSORIES GROUP
  • Series: DIGITAL LIGHTING
  • Product Identification Code: 90773
  • Category/Type of Product: LED Digital Pixel Strips
  • Construction Material: PCB Double Layer Copper Coating / 3 Ounces
  • Body Color: White
  • Energy Consumption: 12 W / M
  • Equivalent: 85 W
  • Energy Saving: >80%
  • Nominal Voltage: DC 12V
  • LED...
See full description See full description

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    12V

    The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.

  • Light Shade

    RGBWW

    The LED film can take on various shades by combining colors, red, green, blue, and warm white (which contains more yellow tones compared to natural white).
  • Connectivity IR
  • See all
Review the product
Product report

Description

Description

Technical Data

  • Brand: GLOBOSTAR LED LIGHTING AND ACCESSORIES GROUP
  • Series: DIGITAL LIGHTING
  • Product Identification Code: 90773
  • Category/Type of Product: LED Digital Pixel Strips
  • Construction Material: PCB Double Layer Copper Coating / 3 Ounces
  • Body Color: White
  • Energy Consumption: 12 W / M
  • Equivalent: 85 W
  • Energy Saving: >80%
  • Nominal Voltage: DC 12V
  • LED Type: EPISTAR SMD 3535
  • Addressable: Yes
  • Communication Protocol: SPI/TTLIC
  • Driver Chip Type: IC TM1814/UCS1912/UCS2912
  • Useful Luminous Flux: 1200 lm/M
  • Luminous Flux Efficiency: 100 lm/W
  • Energy Efficiency Class: G
  • Color Temperature: RGB+WW
  • Light Color: Multicolor RGBWW
  • Color Rendering Index Ra: > 80
  • Color Uniformity in MacAdam Ellipse Steps: ≤ 6 SDCM
  • Luminous Flux Maintenance Factor: 0.9
  • Power Factor (cos φ1): 0.85
  • Flicker Measurement: 0.02 Pst LM
  • Stroboscopic Effect Measurement: 0.001 SVM
  • Beam Angle: 120° Wide Cone
  • Operating Temperature Range: -10…+50 °C
  • Protection Rating: IP20
  • Dimmable: Yes
  • Nominal Lifetime: 30000 Hours
  • Number of Switching Cycles: 50000 On / Off Cycles
  • Certificates & Standards: CE, EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, RoHS 2 Directive 2011/65/EU-(EU)2015/863-(EU)2017/2102
  • Mercury Content: 0.0 mg
  • UV / IR: 0.0 mg
  • 100% Ignition Time:

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
90773

Dimensions

Length
5 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGBWW

Light Colour

RGBWW
The LED film can take on various shades by combining colors, red, green, blue, and warm white (which contains more yellow tones compared to natural white).
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
USB
No

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
12 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
Connectivity
IR
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Data

  • Brand: GLOBOSTAR LED LIGHTING AND ACCESSORIES GROUP
  • Series: DIGITAL LIGHTING
  • Product Identification Code: 90773
  • Category/Type of Product: LED Digital Pixel Strips
  • Construction Material: PCB Double Layer Copper Coating / 3 Ounces
  • Body Color: White
  • Energy Consumption: 12 W / M
  • Equivalent: 85 W
  • Energy Saving: >80%
  • Nominal Voltage: DC 12V
  • LED Type: EPISTAR SMD 3535
  • Addressable: Yes
  • Communication Protocol: SPI/TTLIC
  • Driver Chip Type: IC TM1814/UCS1912/UCS2912
  • Useful Luminous Flux: 1200 lm/M
  • Luminous Flux Efficiency: 100 lm/W
  • Energy Efficiency Class: G
  • Color Temperature: RGB+WW
  • Light Color: Multicolor RGBWW
  • Color Rendering Index Ra: > 80
  • Color Uniformity in MacAdam Ellipse Steps: ≤ 6 SDCM
  • Luminous Flux Maintenance Factor: 0.9
  • Power Factor (cos φ1): 0.85
  • Flicker Measurement: 0.02 Pst LM
  • Stroboscopic Effect Measurement: 0.001 SVM
  • Beam Angle: 120° Wide Cone
  • Operating Temperature Range: -10…+50 °C
  • Protection Rating: IP20
  • Dimmable: Yes
  • Nominal Lifetime: 30000 Hours
  • Number of Switching Cycles: 50000 On / Off Cycles
  • Certificates & Standards: CE, EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, RoHS 2 Directive 2011/65/EU-(EU)2015/863-(EU)2017/2102
  • Mercury Content: 0.0 mg
  • UV / IR: 0.0 mg
  • 100% Ignition Time:

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
90773

Dimensions

Length
5 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGBWW

Light Colour

RGBWW
The LED film can take on various shades by combining colors, red, green, blue, and warm white (which contains more yellow tones compared to natural white).
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
USB
No

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
12 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
Connectivity
IR
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

64,32 €
14,00 €   shipping cost