Surface preparation

To ensure proper adhesion of the product, the surface should be cleaned of dust, grease, oils, loose old paints, rust, and residual mold or moisture.

Apply the product with a brush or roller and let it dry for 20 - 40 minutes. Sand the surface with suitable sandpaper, and it is ready for the final paint. The product acquires all its mechanical strength after 20 - 30 days.

Application conditions

Avoid applying the product at temperatures below 6°C and above 40°C and when relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the product.

Application tools

• Brush
• Roller

During work, keep the tools "wet" inside the container. Drain the product well from the tools and clean them immediately with White spirit. If the product dries, it can only be removed with strong detergents. Do not discharge the washing liquids into the water table.