While it sterilizes in 10 minutes and is convenient in terms of speed, the fact that it does not dry is a major downside of the device, as the water at the end of sterilization runs everywhere and from all the parts. No matter how we try to manage it (with towels underneath and around or by trying to wipe after each use), water always spills outside.

It's good but honestly if I knew I would have bought the 3-in-1 from the same company, for me it doesn't make sense to have a sterilizer that doesn't dry and you have to wipe them with paper afterwards…

2 stars because after 1 day the bottom fills with limescale. I don't have time to do the vinegar process every day with a newborn. Also, as soon as you lift the lid, a lot of water drips and makes everything wet. Maybe there's something better out there. We use bottles from the same company so I have no opinion if bottles from other brands fit

I expected more from this company. On the positive side, it is indeed silent and sterilization is done in 10 minutes, but large and tall bottles do not fit inside, plus after the first 5 uses the bottom got burned and burn marks like rust keep appearing. I will not choose it again

A very remarkable product which you use for your baby, I highly recommend it to every mom who is thinking about what product to buy for her baby!! It has easy-to-follow instructions that won't make you worry about cleaning or preparing for sterilization

One star and that's too much! After using it at most 20 times, the sole ended up like this! Not a good product at all

It does its job but it has some disadvantages such as leaving many drops after finishing that do not dry and I do not know how good it is for them to remain inside the bottle. Also, the instructions say that after each sterilization you should clean the sterilizer, which is very tiring and time-consuming.... After the sterilization is finished, which takes 10 minutes, you have to wait 10-15 minutes for the bottles to cool down because they are very hot... that's all from me

Quite good but if you get Mam bottles with that sterilization you put a little water underneath, throw them in the microwave and they're ready in 10 seconds, while this one takes more time. As a kettle it's good but probably as a prospective mom or dad you don't even need a kettle taking up space in your kitchen. Also, the cable is short, we use it with an extension cord

For 2 months now it has been working at full capacity at least 4 times a day with 4 large Nuk Nature Sense bottles and the nipples and caps and 4 long spoons for mixing the powder. It hasn't leaked water even when I slightly exceed the indicated water amount. Once every 2 weeks I descale it with vinegar and water. I also noticed that when you use bottled water and not tap water, it lasts longer without needing descaling.

The device gets extremely hot—almost to a dangerous level—and water tends to drip everywhere. Another major drawback is that it only fits Philips Avent bottles. If you use any other 250ml bottle, the lid won’t close properly, making it quite inconvenient.

I would not recommend it - its not a 1 star cause it does the job but I am sure there are better ones out there

The only thing I have been afraid to try so far is to use deionized water. However, with a little vinegar once every 2 weeks, it cleans very easily and quickly

In ten minutes it sterilizes. The middle space is quite tall so it can relatively comfortably fit bottles from other brands.

Bought for 55 euros. Fits the large bottles of Dr. Brown, and on top, the pacifiers and nipples can be placed. It is fast and quiet. For the first 6 months that it is needed for the baby, I consider it very good and not worth going for a more expensive model.

The sterilizer is very good, easy to use and easy to maintain. We had the previous generation model and it has definitely improved. It can fit small and large bottles. Obviously, it cannot fit the large ones with the nipples attached, but we don't sterilize the bottles like that anyway... Also, using demineralized water prevents salt build-up and makes it even easier to use. Now, as for the fact that it releases water on the countertop when you open it... it's a sterilizer, it produces steam, what should the water do, drink it :-) ??

The sterilizer does not fit the bottles I have uploaded in the photo. I uploaded a photo of bottles from another company so people know which ones I am talking about. I do not have an opinion on sterilization yet. It is quiet though. Also, when you open it, water comes out from everywhere and falls on the counter!

It is a very good sterilizer for Dr. Brown's bottle nipples and bottle caps. It can hold 6 at a time, the green one is for air. You put it in the bin together with the bottles and nipples, and the caps on top. It also sterilizes and dries, very practical. Personally, I think it's great. I also used deionized water in addition to vinegar occasionally, and it cleans perfectly. Very good!

Unfortunately, it is worse than its previous model. In this one, it is lighter and the lid does not close properly. As a result, when sterilizing, the steam rises from the sides of the lid. We put weight on the lid while it is working to prevent it from rising like that. I regret not keeping the previous model. I would not buy this again.

I will give it 3 stars because it does not fit large bottles from almost any other company except for the same one. If I had known, maybe I wouldn't have bought it

Very good but unfortunately it does not fit bottles from all companies. Placing tall bottles, for example, from a company starting with C, does not close the lid properly. With Avent and a company starting with T, you will not have any problem.

It's perfect. Indeed, in 10 minutes it has everything ready. We have had it for two months now and it is flawless.
Don't bother with vinegar and nonsense for salt, with €1.5 get 4 liters of demineralized water and you're done. If you use it with demineralized water, you will never see salt in the machine... that's it!

My wife asked me for it after I searched for it. It is intended to be tested in a few months. I want to believe that there will be no problem. Any Philips product I have bought so far has not disappointed me.

Like the previous reviewers, I agree that it is worth its money, it can fit large baby bottles, including those from other brands and Philips breastfeeding accessories (I am referring to this breastfeeding accessory because that's what I used).
For proper maintenance, it requires frequent descaling and should not be left closed with the steam for hours after sterilization, as the plate is sensitive. Also, do not use the back of the sponge or other hard surfaces on it as it will easily scratch.

Very good sterilizer, ready in 10 minutes I think. It's not worth anyone buying it with the drying, I just take them out and keep them in the fridge for a day. I haven't tried putting large bottles in it, but as far as I know, it fits both Nuk and Dr. Brown's with the wide neck. It collects salts at the bottom, which is completely normal. What I do is add 1/3 of the dose with white vinegar and run a program. When it finishes, it leaves something yellow, but it comes off with a sponge and dish soap, and it looks like new.

It simply requires regular descaling (we put a little vinegar on the "heating plate" along with some water and activate/close it immediately once the salts are cleaned. Then, a good wipe with a clean cloth and it's like new. If the salts remain and accumulate, the device may even burn.