Vitex Diaxyl Plus impregnating varnish protects and decorates interior and exterior wooden surfaces. Its water-based polyurethane formula forms a thin film that allows the wood to breathe and flexes with its expansion and contraction thanks to its elasticity. UV filters help protect against solar radiation, while its formulation prevents mould and fungi from developing on the film.
Apply to a clean, dry surface with a wood moisture content of up to 18%, at a temperature of 5–35 °C and a relative humidity below 80%. Ready to use; apply with a roller, brush or airless sprayer. Touch-dry in 2–3 hours and ready to recoat after 24 hours. Clean tools immediately after use with water and, if needed, soap or detergent.
- Type: Impregnating varnish
- Application surface: Wood
- Use: Interior and exterior
- Colour: Walnut
- Finish: Slightly satin
- Base: Water-based
- Composition: Polyurethane
- Quantity: 750 ml
- Thinning: Not required
- Coverage per coat: 12–16 m²/lt
- Coverage for two coats: 6–8 m²/lt
- Touch-dry: 2–3 hours
- Recoating time: 24 hours
- Maximum VOC content: 129 g/lt
- Wood moisture content during application: Up to 18%
- Application temperature: 5–35 °C
- Relative humidity during application: Below 80%
- Tool cleaning: With water and, if needed, soap or detergent
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Light Satin
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- Yes
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Walnut
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.