Skroutz.mt

Stayer Welding Machine Inverter MIG / TIG / FCAW with Maximum Welding Current 120A and Duty Cycle 30%
Welding Machines

Stayer Welding Machine Inverter MIG / TIG / FCAW with Maximum Welding Current 120A and Duty Cycle 30%

Capabilities

  • Electronic equipment for flux-cored arc welding (FCAW), gasless wire welding, TIG LIFT ARC, and coated electrode welding.
  • Lightweight and compact for easy transport to the worksite.
  • ...

Capabilities

  • Electronic equipment for flux-cored arc welding (FCAW), gasless wire welding, TIG LIFT ARC, and coated electrode welding.
  • Lightweight and compact for easy transport to the worksite.
  • Classic analog controls for precise adjustments of current, voltage, and wire speed.

Specifications

  • Voltage adjustment for setting welding penetration.
  • No-load...
See full description See full description

  • Welding Current

    120

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
276 00 €
Delivery by Fri, 03 Jul
14,00 €   shipping cost
Sent from Greece
From Nanakis 4.4 (23)
4.4 (23 reviews)
Greece
1 piece
See Tools on the page of Nanakis
Review the product
Product report

Description

Description

Capabilities

  • Electronic equipment for flux-cored arc welding (FCAW), gasless wire welding, TIG LIFT ARC, and coated electrode welding.
  • Lightweight and compact for easy transport to the worksite.
  • Classic analog controls for precise adjustments of current, voltage, and wire speed.

Specifications

  • Voltage adjustment for setting welding penetration.
  • No-load voltage = 60Vdc.
  • Current (A, X= 30%): 20-120A.
  • Wire: 0.9 mm.
  • Electrode: 1.6-3.2 mm.
  • Weight: 2.5kg.
  • Voltage: 230V.
  • Dimensions: 26.8 x 16.6 x 36.2 cm.

Includes

  • Power cable / 3m x 1.5 mm².
  • Ground clamp + cable / 1.5m x 10 mm².
  • Electrode clamp + cable / 2.5m x 10 mm².
  • Internal winding coil 1kg.
  • Built-in torch.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, TIG, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
120 A

Welding Current (max): 120


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Wire Diameter
0.9 mm

Maximum Wire Diameter: 0.9


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
2500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Capabilities

  • Electronic equipment for flux-cored arc welding (FCAW), gasless wire welding, TIG LIFT ARC, and coated electrode welding.
  • Lightweight and compact for easy transport to the worksite.
  • Classic analog controls for precise adjustments of current, voltage, and wire speed.

Specifications

  • Voltage adjustment for setting welding penetration.
  • No-load voltage = 60Vdc.
  • Current (A, X= 30%): 20-120A.
  • Wire: 0.9 mm.
  • Electrode: 1.6-3.2 mm.
  • Weight: 2.5kg.
  • Voltage: 230V.
  • Dimensions: 26.8 x 16.6 x 36.2 cm.

Includes

  • Power cable / 3m x 1.5 mm².
  • Ground clamp + cable / 1.5m x 10 mm².
  • Electrode clamp + cable / 2.5m x 10 mm².
  • Internal winding coil 1kg.
  • Built-in torch.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, TIG, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
120 A

Welding Current (max): 120


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Wire Diameter
0.9 mm

Maximum Wire Diameter: 0.9


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
2500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

276,00 €
14,00 €   shipping cost