Skroutz.mt

Shelly Qubino Wave 1 Mini Smart Switch 1 Channel Wi-Fi Z-Wave & RF 8A With Neutral
Intermediate Switches

Shelly Qubino Wave 1 Mini Smart Switch 1 Channel Wi-Fi Z-Wave & RF 8A With Neutral

The Shelly Qubino Wave 1 Mini Smart Relay Module belongs to the Shelly Wave product family, using the Z-Wave protocol for communication (868.42 MHz in Europe). Z-Wave is specifically designed for...

The Shelly Qubino Wave 1 Mini Smart Relay Module belongs to the Shelly Wave product family, using the Z-Wave protocol for communication (868.42 MHz in Europe). Z-Wave is specifically designed for communication between smart devices using sub-gigahertz frequency to ensure adequate signal propagation. The Z-Wave MESH network topology allows devices located...

See full description See full description

  • Connectivity

    Z-Wave

    Reliable wireless connectivity technology with zero interference.

    Wi-Fi

    The most common connectivity option for individual switches, as it connects directly to the router.

    RF

    Wireless control via radio frequencies.

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

  • Compatible Application

    The compatible app that you download to your mobile phone to control the switch remotely.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

  • Wiring

    With Neutral

    For installations where both power cables are present in the switch box on the wall (phase and neutral).

  • Dry Contact

    Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.

  • Power Measurement

    It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.
  • Dimensions 29x35x16mm
  • See all
Review the product
Product report

Description

Description

The Shelly Qubino Wave 1 Mini Smart Relay Module belongs to the Shelly Wave product family, using the Z-Wave protocol for communication (868.42 MHz in Europe). Z-Wave is specifically designed for communication between smart devices using sub-gigahertz frequency to ensure adequate signal propagation. The Z-Wave MESH network topology allows devices located farther from the central unit to communicate effectively.

The device operates at 230V AC. Despite the AC supply, the output terminals feature dry contact. Its parameter combination can be adjusted to meet the user's complex needs.

Pairing Instructions:

  • The unit has an "S" button for pairing and factory reset.
  • To pair, press and hold the "S" button until the LED indicator changes to blue.
  • The unit supports various combinations for connecting devices to the network.

Installation:

  • Suitable for standard installation sockets, but deeper ones are preferred for better installation.
  • Can be mounted on a DIN rail with an adapter (sold separately).
  • Requires both phase and neutral wire to operate.

Specifications:

  • Power Supply: 240 VAC
  • Output: Dry contact
  • Maximum Current: 230 VAC 8A (resistive), 30 VDC 5A (resistive)
  • Operating Temperature: -20 to +40 °C
  • Dimensions: 29 x 35 x 16 mm
  • Weight: 29g

The Shelly Qubino Wave 1 Mini Smart Relay Module offers flexibility in communication and installation, contributing to smart energy management at home.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Switch Type
Smart Switch
Number of Channels
1

Number of Channels

Indicates how many different lamps or devices the switch can control independently. For example, a 1-channel switch controls one lighting circuit, while a 4-channel switch can manage up to four different devices from the same unit.
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.
Dimensions (Spec Summary)
29x35x16mm

Smart Attributes

Connectivity
Z-Wave, Wi-Fi, RF

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

RF

Wireless control via radio frequencies.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
8 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
With Neutral

Wiring

With Neutral

For installations where both power cables are present in the switch box on the wall (phase and neutral).
Compatible Application
Shelly Smart Control

Compatible Application

The compatible app that you download to your mobile phone to control the switch remotely.

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
Yes

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Shelly Qubino Wave 1 Mini Smart Relay Module belongs to the Shelly Wave product family, using the Z-Wave protocol for communication (868.42 MHz in Europe). Z-Wave is specifically designed for communication between smart devices using sub-gigahertz frequency to ensure adequate signal propagation. The Z-Wave MESH network topology allows devices located farther from the central unit to communicate effectively.

The device operates at 230V AC. Despite the AC supply, the output terminals feature dry contact. Its parameter combination can be adjusted to meet the user's complex needs.

Pairing Instructions:

  • The unit has an "S" button for pairing and factory reset.
  • To pair, press and hold the "S" button until the LED indicator changes to blue.
  • The unit supports various combinations for connecting devices to the network.

Installation:

  • Suitable for standard installation sockets, but deeper ones are preferred for better installation.
  • Can be mounted on a DIN rail with an adapter (sold separately).
  • Requires both phase and neutral wire to operate.

Specifications:

  • Power Supply: 240 VAC
  • Output: Dry contact
  • Maximum Current: 230 VAC 8A (resistive), 30 VDC 5A (resistive)
  • Operating Temperature: -20 to +40 °C
  • Dimensions: 29 x 35 x 16 mm
  • Weight: 29g

The Shelly Qubino Wave 1 Mini Smart Relay Module offers flexibility in communication and installation, contributing to smart energy management at home.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Switch Type
Smart Switch
Number of Channels
1

Number of Channels

Indicates how many different lamps or devices the switch can control independently. For example, a 1-channel switch controls one lighting circuit, while a 4-channel switch can manage up to four different devices from the same unit.
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.
Dimensions (Spec Summary)
29x35x16mm

Smart Attributes

Connectivity
Z-Wave, Wi-Fi, RF

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

RF

Wireless control via radio frequencies.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
8 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
With Neutral

Wiring

With Neutral

For installations where both power cables are present in the switch box on the wall (phase and neutral).
Compatible Application
Shelly Smart Control

Compatible Application

The compatible app that you download to your mobile phone to control the switch remotely.

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
Yes

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

24,68 €
14,00 €   shipping cost