Skroutz.mt

Emtop Impact Demolition Hammer Battery Brushless 20V 1x4Ah with Chuck SDS Plus ELRH202081
Rotary Hammers

Emtop Impact Demolition Hammer Battery Brushless 20V 1x4Ah with Chuck SDS Plus ELRH202081

Motor:

  • Voltage: 20V
  • No-load speed: 0-1100rpm
  • Impact rate: 0-5400 bpm
  • Impact energy: 2.0J
  • Maximum drilling capacity: diameter 22mm in concrete
  • Chuck system: SDS plus
  • Work light: Built-in LED
  • Includes:...

Motor:

  • Voltage: 20V
  • No-load speed: 0-1100rpm
  • Impact rate: 0-5400 bpm
  • Impact energy: 2.0J
  • Maximum drilling capacity: diameter 22mm in concrete
  • Chuck system: SDS plus
  • Work light: Built-in LED
  • Includes: 3 drill bits, 1 chisel, 1 weight piece (EFCR20200), 1 battery 4.0 Ah (EBPK2002)
  • Charging voltage: 220-240V~50/60Hz
  • Packaged in a carrying case
See full description See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    2

    For casual amateur use, 2 to 4 Joules are considered sufficient.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Speed Setting

    1

    Ability to control the rotation speed, either through the trigger or via a speed selector.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.

  • Volt

    The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

    2. Impact energy is another characteristic that shows the "strength" of the tool.

    20

    Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Motor:

  • Voltage: 20V
  • No-load speed: 0-1100rpm
  • Impact rate: 0-5400 bpm
  • Impact energy: 2.0J
  • Maximum drilling capacity: diameter 22mm in concrete
  • Chuck system: SDS plus
  • Work light: Built-in LED
  • Includes: 3 drill bits, 1 chisel, 1 weight piece (EFCR20200), 1 battery 4.0 Ah (EBPK2002)
  • Charging voltage: 220-240V~50/60Hz
  • Packaged in a carrying case

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
1
Volt
20 V

Volt: 20

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Ah
4 Ah

Ah

The battery capacity. The higher the number, the longer the tool's operating time.
2.
An average continuous working time is 20-25 minutes per Ah, but it always depends on the type of work we are doing.
Lithium
No

Drilling Features

Steel Ø
22 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
22 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
22 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
1100 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
2 Joule

Impact Energy: 2

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
5400 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
Yes

Brushless


It features a brushless motor that generates less heat and friction, resulting in less wear on the motor and longer battery life.
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Case
Handle included
Yes
Integrated Light
Yes
Guide
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Motor:

  • Voltage: 20V
  • No-load speed: 0-1100rpm
  • Impact rate: 0-5400 bpm
  • Impact energy: 2.0J
  • Maximum drilling capacity: diameter 22mm in concrete
  • Chuck system: SDS plus
  • Work light: Built-in LED
  • Includes: 3 drill bits, 1 chisel, 1 weight piece (EFCR20200), 1 battery 4.0 Ah (EBPK2002)
  • Charging voltage: 220-240V~50/60Hz
  • Packaged in a carrying case

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
1
Volt
20 V

Volt: 20

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Ah
4 Ah

Ah

The battery capacity. The higher the number, the longer the tool's operating time.
2.
An average continuous working time is 20-25 minutes per Ah, but it always depends on the type of work we are doing.
Lithium
No

Drilling Features

Steel Ø
22 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
22 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
22 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
1100 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
2 Joule

Impact Energy: 2

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
5400 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
Yes

Brushless


It features a brushless motor that generates less heat and friction, resulting in less wear on the motor and longer battery life.
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Case
Handle included
Yes
Integrated Light
Yes
Guide
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.