AnyCubic Tough Resin 2.0 (Gray) is a unique resin that exhibits increased durability. It is relatively flexible and crack-resistant, making it possible to print miniatures and delicate models. The final models printed with this resin are less likely to be damaged, even if they fall from a height.

The Tough Resin 2.0 is made with eco-friendly materials that are non-irritating and do not emit strong odors. It is compatible with most LCD 3D printers. An ideal choice for perfectionists, the Tough Resin 2.0 is perfect for prints that require greater precision. It is suitable for printing in the wavelength range of 365nm to 405nm, allowing you to achieve optimal results. The resin also exhibits less shrinkage, meaning your models are full of details and their surface is perfectly finished, especially when used in conjunction with AnyCubic printers.

• Physical and Chemical Properties:
• UV wavelength: 365-405 nm
• Structure: 1.10-1.15 g/cm³
• Viscosity: 450-500 cPimPa-s
• Hardness: 82-84D
• Tensile strength: 30-42 MPa
• Elongation at break: 60-72%
• Shrinkage during molding: 5.1-6.2%
• Bending strength: 42-52 MPa
• Flexural modulus: 1500-2000 MPa
• Heat deflection temperature: 50-55°C
• Exposure time for the bottom layer: 20-40s
• Conventional exposure time: 1.5-3s (for color screens 8s)
• Resin cleaning: Alcohol
• Shelf life: 1.5 years
• Color: Gray

Recommended Printing Parameters for Various Anycubic Printer Models:

• Layer thickness: 0.05 mm
• Exposure time: 1.5s to 3.6s
• Non-exposure time: 1s
• Exposure time for lower layers: 20s to 35s
• Number of lower layers: 5-6
• Anti-impacts: 1
• Z lift distance: 5mm to 10mm
• Z lift speed: 2mm/s to 6mm/s
• Z retract speed: 2mm/s to 6mm/s