Update (7/5/26): I found a way to have good signal in the back room.
For now, I’m giving 3 stars as it works very well in the living room. The second one I put in the back room keeps losing signal. I will update once I find a solution for the signal.

I use it as an access point. I needed it because: 1) I have a 1Gbps connection with Inalan and the router they give you (WiFi 5) is, to put it mildly, terrible. 2) I have many IoT devices at home.

The setup was easy but I had read previous comments here that mentioned various tips so I think those helped me set it up in 2 minutes. Everything at home works 100% smoother. I no longer have issues like I used to, having to reset the router because I was facing freezes like in 2007. Very good purchase at a very good price!

The coverage is truly excellent, especially in open areas and even at high speeds. Although occasional disconnections are observed, they are not frequent and the system recovers immediately on its own; this may also be due to the internet connection itself. Overall, this is a reliable and effective solution, which I highly recommend.

Stable connection, with enough ports for wired connection. In an 80 sq.m. house, it covers everywhere comfortably, without significant signal drop.

Very good router. I have set up a mesh network from the 6th floor to the ground floor. It works perfectly. The only problem, which of course does not concern the router, is that this particular one has 'European' origin so in the MiHome app it connects to the European server and not the Chinese one. Since the primary router I have is from deep China (so it connects to the Chinese server), it cannot see the router and therefore you cannot have direct control. It's a small problem, but these things happen when you buy devices from European sites and not from Ali.

Very quick configuration and connection to the mesh network. The connection with the ethernet is very convenient and transmits 1Gbps network from inalan throughout the house. 4 stars because unfortunately it does not give you the option to configure the network, only what the app provides.

Easy application with precise results. Worth the money for what it does. It doesn't take breaks during use, so far.

First impressions are extra positive!

Looks great, installs easy (took me roughly 5 to 10 minutes tops to get it working), and works great too (connectivity, stability, range, speed).

I performed 4 test runs with Speedtest by Ookla and received beyond satisfactory results.
See image attached, where I show in green the mother network (200 Mbps Symmetric Fiber) speed results in green, marked with an A, versus the 4 test runs of the secondary network, provided by this device, marked in purple with the letter B.

Will be coming back with an update after at least a month's usage.

P. S.
Mother Network A is located on the first floor.
Secondary network B, via an ethernet cable and into this yet another truly great product by Xiaomi, is located downstairs on the ground floor.

Very good access point, although I have no experience with other similar types. I worked with extenders for many years and encountered the classic problems with disconnections and not very good speed. As soon as I set them up, I saw a huge difference. Combined with the router, I covered an area of 190 square meters indoors and about half a hectare of open field outdoors without interference, without losing speed. The connection is very easy. I highly recommend it.

Unfortunately, if you do the update, the 5GHz frequency stops working, which means that your speed drops to 1/3. Mine went from 700 to 150. And unfortunately, you can't downgrade, as they told me at the service. Fortunately, it happened to me the same day I bought it, and they refunded my money back

It gave me a bit of trouble during the setup but it works very well; I've had it for several months and it hasn't had any issues even when there were power outages due to construction in the neighborhood, it resynchronized immediately. The app is very user-friendly

We bought it for the office at work after reading the reviews. I can say that it was one of the best purchases we have made. The router does not lose signal at any point within a space of 200 square meters.

Good for casual users, but care is needed with the settings to ensure good compatibility with all devices, so pay attention to the WPA and WiFi versions you are using. Additionally, they work perfectly when the nodes are not connected via WiFi, but are connected via ethernet, AND when the nodes' access to the Xiaomi API is not cut off (if you have pihole, adguard, or similar).

I got it for 60 euros on sale and I can say that it does its job exceptionally well. Its application is okay, it's not its strong point and you can't do many things. However, in terms of coverage and signal of the devices, it is very good. Easy connection between them even through a triple wall, they get full signal. In a 140 sqm house, it fits perfectly and more than meets my needs. Now at 100 euros, I might consider other options, but at 60, which I got it for, I consider it a no-brainer.

Stay away. The mesh is significantly better than TP-LINK at properly mapping the network (which node should connect where), but that's as far as it goes. The UI is a disaster with things either warning you that if you change them it will reboot or just doing it on the spot because the guy who created it did it one afternoon and was never told to change it. Also, if you have a device of your own or a third node at a perfect distance to connect with more than one different node, instead of saving one of the two and saying "Whoa bro, we're staying here," it just pulls disconnections and switches every 2 minutes until you bury it 2 meters underground so it doesn't connect with either of the 2.

There is an issue with the updates and the codes. Keep the existing version. DO NOT upgrade the software.

In a 100 square meter house located in the center and it cannot cover them. Placed in the living room (at one end of the house, that is) it has a weak signal line.

I bought it because of the name, it's definitely not bad, good range, nice as a device, you can easily have it in the living room without taking up much space. Fast as wireless, I also receive the 360/360 of the connection, I would say better cooperation with Xiaomi's smart devices.
On the downside, in order to work properly, you need to have it as a router, not as an AP, there you lose almost 70% of its capabilities, for example device blocking, QoS, even guest wifi.
This is an issue if you have another network with a cable and you want to access wireless devices from the wired one.
If I knew about this issue, maybe I wouldn't have chosen it, now I had to change the way of connection I had for so many years.

0.5 kilograms. It has a very good range, it's worth its money for sure

Let me also write my experience. I have ethernet in every room but I didn't have a good signal on wifi. By connecting the devices easily, although it shows a signal of 390mbps, it didn't download properly because the signal I was receiving for transmission was low wirelessly. What I did:
1st module, WAN port to switch → router
1st module, 2nd LAN cable of the module to switch
2nd module, WAN port to another switch in the room (which is connected to the first switch in the living room)

This way, the 2nd module receives a wired signal, but the mesh works properly and I have absolute speeds. I saved the purchase of a third module and the speeds are as if I am next to the router now.

The only negative thing is the short power cable. PS before, I had 2 Asus RT-AC85P, and the coverage was terrible, 390mbps in the living room, 60mbps in the room (both wired)

It is a very good solution for its price, I have installed it in a 160sqm maisonette and it is flawless. Note: For the wifi, it is good for the devices we will connect to be able to support these speeds.

It was purchased and is combined with the Xiaomi AX3200.
Before, I had the Cosmote router with the AX3200 as a repeater and I was losing somewhere around 100mbps.
Now, the Cosmote router only works for the phone and the entire network is handled by the AX3200 with the AX3000 working as a repeater. Now I get the full speed (300Mbps).
I don't know how it will handle disconnections. Yesterday, the installation was done, but the AX3200 hasn't had a single disconnection for 4 months. So, I expect something similar with the AX3000.
For the installation, I followed the instructions of a user who left a comment on the AX3600.

I will agree with the previous speakers: yes, the installation process is a bit lacking in the manual. Hint: do not immediately connect the ethernet, start the setup without it.

Otherwise: superior wireless network compared to the providers' modem/routers, better range but not a drastic difference, and all the basic settings one would need (although some advanced ones are missing).

For those who have the Mi Home application, setup and management can also be done through it, which is very convenient.

Update 11/23: For anyone who wants to use it as an AP, after the latest firmware update: even if you select to use it as an AP, Xiaomi will set up the unit as a Wired Repeater. Go to router.miwifi.com and in the Repeater settings, you will find an option to Create a new network. This will change the function to an access point.

I closed the Wi-Fi of the router and installed one with a cable directly to the router in the living room and the second one in the bedroom, where there are 2 walls in between. During the installation, because I have Cosmote connection, I entered my broadband codes that I requested from the company in order for the ax3000 to function as an AP and for the management of the IP addresses of the devices and the Dhcpcd to be done through it. I noticed that every few hours I had interruptions and disconnections of all devices and the light on the mesh system turned orange. One solution to the problem is to access the settings of the ax3000's Wi-Fi through Xiaomi home and specifically in the internet connection mode settings and change the switch modes to dynamic IP internet connection so that the routing is done by the router as before and not by the ax3000. Since then, I haven't noticed any disconnections for now!

Good product. I bought it because I have the Xiaomi AX 3600 AIoT Router and since my house is big and I have multiple WiFi cameras, I obviously needed more WiFi signal coverage. Well, this does it as a professional Mesh Node should. It connected wirelessly without UTP, etc. directly to the Router and has created a WiFi Mesh Network.