The Audison Forza AF M1D mono car amplifier delivers up to 1200 W RMS at 1 Ω and can operate on its own or together with AF bit amplifiers and a standalone signal processor. It features high- and low-level inputs, as well as an adjustable-frequency low-pass filter that can be bypassed. Manual controls include 0–180° phase selection and bass boost adjustment at 45 Hz.
The ART function enables automatic switching on and off via BTL speaker outputs, while USS simulates a load on the speaker inputs. It can be used to add a subwoofer to systems without an Audison AF bit amplifier and is compatible with the optional VCR-S2 level controller. RMS power is 600 W at 4 Ω, 1000 W at 2 Ω and 1200 W at 1 Ω.
- Number of channels: 1
- Amplifier class: A
- Amplification technology: Class D
- RMS power at 4 Ω: 600 W
- RMS power at 2 Ω: 1000 W
- RMS power at 1 Ω: 1200 W
- Minimum load impedance: 1 Ω
- Inputs: High- and low-level
- Filter: Full-range or low-pass, 50–150 Hz, 24 dB/octave
- Phase: Adjustable from 0 to 180°
- Bass boost: Adjustable from 0 to 6 dB at 45 Hz
- Pre-In input sensitivity: 0.6–6 VRMS
- Speaker-In input sensitivity: 2.2–22 VRMS
- Frequency response: 10–500 Hz
- Signal-to-noise ratio: 105 dBA
- Damping factor: 125
- Power supply voltage: 11–15 VDC
- Operating voltage: 6.5–17.5 VDC
- Idle current: 1.2 A
- Consumption at maximum music power: 65 A at 14.4 VDC and 1 Ω
- Remote output: 6.5–15 VDC, 150 mA
- Remote input: 4–15 VDC, 1 mA
- Dimensions: 240 × 47 × 156 mm
- Weight: 1.95 kg
- Number of Channels
- 1 Channel
- Output Power (4 Ohm)
- -
- Amplifier class
- A
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.