You say Spigen, what could go wrong. Awful. As easy as it is to install, it makes you struggle later to get rid of the bubbles and you have to rub for an hour until they go away. We're talking about a terrible product.

I've had it for a month, so far it's ok, I will come back later to see how it will perform with my work since I use it in tough conditions! I like the clarity it has, and another glass I had paid more for per piece because at the moment this one gives us two pieces, I wasn't very satisfied, it was a bit blurry, something like that. This one is very good quality and of course, we'll see how long it lasts!

On a 17 Pro Max, the top side came off in 3 weeks for no reason. It doesn't cover the screen 100%, so when you look at the phone a bit more from the side than usual, it iridesces. Spigen is done for, unfortunately.
Update: I had exactly the same problem with the 2nd glass in the package! The phone is using the original Apple silicone case!

Very good. It fit perfectly on my phone (iPhone 17 Pro Max) and so far, it hasn't come off, also every time I dropped it, the glass didn't crack at all. It seems to be of very good quality and construction

I had installed an old one before and it was just fine, this is the worst, I ruined both and neither went on directly, I had to put it on by hand and it has countless bubbles

Perfect fit, very easy installation. It is different from the cheap ones you find on sites like Temu. I think this one doesn't get fingerprints as easily.

I have bought dozens of Spigen screen protectors and hundreds of Chinese ones, and this is the first time a screen protector has broken during installation! While I had placed it, I was gently pressing with the included spatula to remove the air and it cracked.

After a fall from 1 meter, the tempered glass cracked a little at the corner without creating a flow or affecting the whole glass

Spigen has deteriorated. It does not center properly on the iPhone 16 Pro Max. The air removal tool is unacceptable. Also, it only has one plastic guide, whereas it used to have two. Unacceptable quality.

1 year and 2 months after wearing the same screen protector and after countless times my iPhone 16 Pro Max fell, the screen protector did not break, did not crack, did not suffer any damage, it just started to collect small marks from use. I will order it again to freshen it up for aesthetic reasons.

the screen protector fits the iphone 17pro max, it sits just fine, simply at the bottom part of the screen, the screen is not completely covered, but the difference is small

Purchase via Skroutz. I received exactly what I expected. 2 screen protectors with 2 separate guides. Not like the ones some people mention. One protector with a guide and another one without.
The application was as expected. Simple. Of course, there was some air around the edges as most people mention in the comments and pictures. But it was removed very easily with the little tool included in the package.
So personally for me, on the iPhone 16 Pro Max, they turned out just fine!

Classic Spigen, affordable with 2 glass protectors but you need to be extremely careful not to get any lint during application. Last time

For the last 10 years I have only been buying Spigen cases and screen protectors. This is the first time I have been so disappointed. I put on the screen protectors and they cracked on their own after a few days. Both of them!! No drops or anything else. They just broke

Just like for the 15-inch, I chose this specific screen protector for the 17-inch with my eyes closed. Fast and easy installation without any fuss.

It does not stick well around the edges of the iPhone 16 Pro Max.
It is the first time that a Soigen screen protector does not stick properly..

Out of the 3 screen protectors, only one fit well. The other 3 do not fit properly on the left side and the whole side comes off. Wasted money, 1 star only for the easy installation system and the cloth.

It does not fully cover the screen. It leaves a small gap around the edges. For the first time, I struggled with a Spigen screen protector to remove the air bubbles... And for the first time, I was disappointed by the hassle of installation and the removal of air bubbles so much... However, once I managed it, I know I have very good protection for my phone, but if I wasn't an experienced user and hadn't put in a lot of effort, I would have ended up with an annoying screen protector full of air bubbles on my phone..

Unfortunately, it also left gaps around the edges for me on both lenses. Never had complaints from Spigen on many iPhones... With the 16 Pro Max, there is an issue.

Much better than I expected.
There are essentially two glass protectors in the package with their installation kit.

I installed it in the bathroom after making steam.

I rubbed it quite a bit.
I left it for 1 minute, maybe even more instead of 30 seconds.

It didn't make any bubbles. As a precaution, I used the spatula afterwards, insisting around the edges.

The image hasn't been distorted. Additionally, and more importantly, the touch of the screen hasn't changed, which I was worried about.

Regarding durability, I have no opinion. However, now I use the phone without stress in pockets, at the beach, etc.

Finally, I should add that it is fully compatible with Spigen cases.

So, this particular one has been purchased twice. The first time from American Amazon. It fit perfectly, left no gaps, and both glass protectors were properly placed in the installation guide. In contrast to the ones just bought from here. Larger gaps, bubbles that, okay, go away after a while, and only one guide. Which means that for the second glass protector, you have to find a way to center it yourself and place it within the guide. Guaranteed success (not). As a result, considering the slightly smaller dimensions, it ended up a bit crooked and left a larger gap on one side.

The edge around needs to be smoother. If you don't use a case, your finger "catches" on the cut of the glass when you try to swipe up the Tab Bar to unlock. Obviously, I don't mean that it cuts you, but you can feel the cut glass. On the iPhone 13 Pro Max where I had the same glass, there was no issue at all.

Easy installation but Spigen has deteriorated as a company three times and leaves bubbles on the edge, the first after 3 months, the second after a week, and the third immediately. I won't risk it again, it's for iPhone 16 Pro Max, stay away from Spigen, it's frustrating

The touch quality, as with the previous Spigen screen protectors, is very good, but the application was much more difficult for me than with the previous phone I had (12 Pro Max). Besides the fact that I couldn't get it on straight and there were many bubbles, the top right corner especially came off the phone, I think because the 16 Pro Max has very thin bezels (definitely thinner than the 12 Pro Max), it's very hit or miss to apply it by yourself. I went to have them lift it and reapply it correctly at a store, but they didn't apply it that well either because if you look at the sides of the screen where the glass ends, it appears to be slightly smaller than the phone's screen, resulting in strange colors showing on the left and right

Although I have gone through quite a few screens and have some experience in this specific area, it created quite a few bubbles, so it took me some time to push them to the side with the special tool

I have been using the same exact Spigen glass for years. This particular one was a complete failure. Air that doesn't go away no matter what and the glass peels off directly from the edges. Also, the packaging does not have 2 installation bases but one, and for the second glass, you have to place it in the base yourself and then on the phone

Everything is fine and it was installed very easily and quickly, but in some spots, no matter how clean and new the phone was, it left a very small mark, I would say

Initially hesitant due to some negative reviews... but in the end, it turned out to be a very good product and easy installation.

While for so many years I've been using Spigen! This one didn't stick around the screen! I've used so many Spigen ones over the years....! This one is a flop