Skroutz.mt

Plasma Cutter Built-in Air Compressor 230v 40a
Welding Machines

Plasma Cutter Built-in Air Compressor 230v 40a

Manufacturer number: S-PLASMA 40

The plasma cutter from the German company STAMOS GERMANY has a maximum cutting current of 40 A, allowing the processing of materials such as steel, nickel, aluminum,...

Manufacturer number: S-PLASMA 40

The plasma cutter from the German company STAMOS GERMANY has a maximum cutting current of 40 A, allowing the processing of materials such as steel, nickel, aluminum, copper, and other conductive metals up to 10 mm thick.

Product features:

  • Hybrid: Capable of cutting steel and other conductive metals (titanium, copper, brass,...
See full description See full description

  • Welding Current

    40

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    5.08

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
The product is not available at Skroutz Last updated: 7 months ago
Review the product
Product report

Description

Description

Manufacturer number: S-PLASMA 40

The plasma cutter from the German company STAMOS GERMANY has a maximum cutting current of 40 A, allowing the processing of materials such as steel, nickel, aluminum, copper, and other conductive metals up to 10 mm thick.

Product features:

  • Hybrid: Capable of cutting steel and other conductive metals (titanium, copper, brass, etc.).
  • Functionality: Built-in compressor that ensures a continuous supply of compressed air.
  • Performance: Modern MOSFET technology that ensures 93% work efficiency and precise, safe cutting.
  • Ease of use: Large regulator that allows precise adjustment of the cutting current without needing to remove gloves.
  • Easy transport: Comfortable handle, small size, and weight that allow for easy transport of the device.
  • Convenience: Long 4-meter cables that ensure freedom of movement during cutting and facilitate work in hard-to-reach places.

The STAMOS device is manufactured according to strict European standards and has passed checks according to CE and RoHS standards.

Working method:

  • Plasma cutting: The current up to 40 A allows the device to easily cut metals such as iron, stainless steel, cast iron, copper, and aluminum. The gas pressure is continuously adjustable, allowing precise control of plasma flow.

The package includes:

  • Plasma cutter
  • Tool case
  • Ground cable with clamp
  • Plasma handle
  • Consumable parts
  • User manual

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
40 A

Welding Current (max): 40


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
5.08 kVA

Power: 5.08


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
21600 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Manufacturer number: S-PLASMA 40

The plasma cutter from the German company STAMOS GERMANY has a maximum cutting current of 40 A, allowing the processing of materials such as steel, nickel, aluminum, copper, and other conductive metals up to 10 mm thick.

Product features:

  • Hybrid: Capable of cutting steel and other conductive metals (titanium, copper, brass, etc.).
  • Functionality: Built-in compressor that ensures a continuous supply of compressed air.
  • Performance: Modern MOSFET technology that ensures 93% work efficiency and precise, safe cutting.
  • Ease of use: Large regulator that allows precise adjustment of the cutting current without needing to remove gloves.
  • Easy transport: Comfortable handle, small size, and weight that allow for easy transport of the device.
  • Convenience: Long 4-meter cables that ensure freedom of movement during cutting and facilitate work in hard-to-reach places.

The STAMOS device is manufactured according to strict European standards and has passed checks according to CE and RoHS standards.

Working method:

  • Plasma cutting: The current up to 40 A allows the device to easily cut metals such as iron, stainless steel, cast iron, copper, and aluminum. The gas pressure is continuously adjustable, allowing precise control of plasma flow.

The package includes:

  • Plasma cutter
  • Tool case
  • Ground cable with clamp
  • Plasma handle
  • Consumable parts
  • User manual

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
40 A

Welding Current (max): 40


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
5.08 kVA

Power: 5.08


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
21600 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.