Skroutz.mt

Yato Construction Site Helmet with Earplugs White YT-73972
Work Helmets

Yato Construction Site Helmet with Earplugs White YT-73972

The white protective helmet YT-73972 is made from durable ABS material and designed for maximum user comfort. It features a universal size with an adjustable range from 53 to 64 cm. The special 29 mm...

The white protective helmet YT-73972 is made from durable ABS material and designed for maximum user comfort. It features a universal size with an adjustable range from 53 to 64 cm. The special 29 mm wide slots on the sides allow for the installation of dedicated noise protection earmuffs.

The high comfort of use is determined by the following four elements:...

See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The white protective helmet YT-73972 is made from durable ABS material and designed for maximum user comfort. It features a universal size with an adjustable range from 53 to 64 cm. The special 29 mm wide slots on the sides allow for the installation of dedicated noise protection earmuffs.

The high comfort of use is determined by the following four elements:

  • The polyethylene cradle with six-point support from a fabric tape, special material with foam and sweat absorption properties make the helmet almost imperceptible on the head.
  • The size adjustment via a regulation screw allows size adaptation directly to the user's head.
  • The flexible chin strap with adjustable length, connected directly to the cradle instead of the helmet, not only prevents accidental slippage but also allows for appropriate protection of the cradle.
  • The ventilation openings in the helmet casing improve air circulation.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Construction Site
with Earplugs
Yes
Colour
White

Certifications / Standards

Standard EN 397
No

Standard EN 397

Mainly protects against falling objects on the top of the head and offers basic protection against brief contact with electrical wires.
Standard EN 12492
No

Standard EN 12492

These helmets have a chinstrap that withstands a force of over 50kg to prevent the helmet from coming off the worker's head in the event of a fall. Note: They usually do NOT have ventilation holes if they are also intended for electrical work, but the mountaineering style does.
Standard EN 50365
No

Standard EN 50365

Protection for work in installations not exceeding 1000V AC or 1500V DC. These helmets must not contain any metal parts and must not be ventilated (without holes).
Standard EN 14052
No

Standard EN 14052

They provide much greater protection than EN 397, mainly against side impacts and sharp objects. They are more expensive and premium helmets.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The white protective helmet YT-73972 is made from durable ABS material and designed for maximum user comfort. It features a universal size with an adjustable range from 53 to 64 cm. The special 29 mm wide slots on the sides allow for the installation of dedicated noise protection earmuffs.

The high comfort of use is determined by the following four elements:

  • The polyethylene cradle with six-point support from a fabric tape, special material with foam and sweat absorption properties make the helmet almost imperceptible on the head.
  • The size adjustment via a regulation screw allows size adaptation directly to the user's head.
  • The flexible chin strap with adjustable length, connected directly to the cradle instead of the helmet, not only prevents accidental slippage but also allows for appropriate protection of the cradle.
  • The ventilation openings in the helmet casing improve air circulation.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Construction Site
with Earplugs
Yes
Colour
White

Certifications / Standards

Standard EN 397
No

Standard EN 397

Mainly protects against falling objects on the top of the head and offers basic protection against brief contact with electrical wires.
Standard EN 12492
No

Standard EN 12492

These helmets have a chinstrap that withstands a force of over 50kg to prevent the helmet from coming off the worker's head in the event of a fall. Note: They usually do NOT have ventilation holes if they are also intended for electrical work, but the mountaineering style does.
Standard EN 50365
No

Standard EN 50365

Protection for work in installations not exceeding 1000V AC or 1500V DC. These helmets must not contain any metal parts and must not be ventilated (without holes).
Standard EN 14052
No

Standard EN 14052

They provide much greater protection than EN 397, mainly against side impacts and sharp objects. They are more expensive and premium helmets.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.