High-quality alkyd solvent primer with excellent anti-corrosive properties and high durability thanks to the new technology of non-toxic anti-corrosive pigments. It is applied to metal surfaces such as railings, agricultural machinery, and car bodies, providing effective protection against rust. It ensures excellent coverage, works smoothly, and spreads wonderfully, creating a uniform, paintable matte surface before applying the final coat.

SURFACE PREPARATION:

• The surface must be dry, stable, and free from dust, remaining residues, and loose old paints.
• In case of old rust, sand the surface with suitable sandpaper.
• Use KRAFT BRUSH SOLVENT for surface degreasing.
• Wet sanding is recommended for surface preparation.

APPLICATION INSTRUCTIONS:

• Ready to use. If necessary, thin 5-10% vol. with KRAFT BRUSH SOLVENT and mix well.
• Suitable painting tools: Brush, roller, or air gun.
• Apply 1-2 coats of KRAFT RUST BLOCKER for an ideal result.
• Should only be applied in an open or well-ventilated area.
• Surface drying in 1-2 hours at 25°C and relative humidity of 50%.
• Do not apply at temperatures below 5°C and above 35°C, and over 65% relative humidity.

INSTRUCTIONS FOR AFTER APPLICATION:

• Clean tools immediately after use with KRAFT BRUSH SOLVENT, followed by warm water and soap.
• Seal the container well to keep it in good condition for future use and store it in a cool place away from sunlight or frost.

TECHNICAL DATA SHEET