The GRsistemi SW300-KIT-3 motor kit automates a double-leaf swing garage door with two linear electromechanical actuators permanently lubricated with lithium grease. Each motor drives a door leaf weighing up to 250 kg and measuring up to 3 m wide; an electric lock is required for door leaves wider than 2.5 m. The mechanism supports an opening angle of up to 120° and up to 20 opening and closing cycles per hour at 20 °C.

The kit includes an S7-150 control unit, three Wiz wireless remote controls, wired safety photocells, and an LED operation warning beacon. The motors operate at 230 Vac and can be disengaged with a key for manual opening and closing in the event of a power outage. The control unit supports automatic closing, connection of an electric lock, and adjustment of the motor torque or force.

• Door type: Double-leaf swing
• Direction: Right
• Mechanism type: Linear, electromechanical, non-reversible, permanently lubricated with lithium grease
• Maximum door leaf weight: 250 kg
• Maximum door leaf width: 3 m
• Maximum door leaf width without an electric lock: 2.5 m
• Maximum opening angle: 120°
• Operating cycles: Up to 20 opening and closing cycles per hour at 20 °C
• Usable piston stroke: 30 cm
• Motor power supply and operation: 230 Vac, single-phase alternating current
• Supply current: 0.9 A
• Motor power consumption: 330 W
• Capacitor capacity: 8 μF
• Maximum force: 2200 N
• Maximum usage frequency: 35% - S3
• Motor speed: 1400 rpm
• Operating temperature range: From -25 °C to 60 °C
• Motor winding thermal protection: 150 °C
• Thermal reset time: 5 min
• Release method: Key-operated
• Protection rating: IP43
• Motor weight: 4.5 kg
• Kit weight: 15 kg
• Package dimensions: 775 × 235 × 125 mm
• Minimum hinge-to-hinge distance: 670 mm
• Maximum hinge-to-hinge distance: 970 mm
• Maximum linear mechanism speed: 0.018 m/s
• Opening and closing time: 33 s
• Housing material: Aluminum
• Housing color: Black
• Control unit: S7-150
• Remote controls: 3 Wiz wireless remotes, 433.92 MHz, with Fixed Code encoding and 4 buttons
• Remote control range: Approximately 50 m
• Maximum number of remote controls: 250
• Remote control programming method: Button-operated
• Remote control deletion method: Button-operated
• Safety photocells: Wired, with transmitter and receiver
• Operation warning beacon: LED
• Automatic closing: Supported
• Electric lock connection: Supported
• 230 Vac warning light connection: Supported, with intermittent operation
• 230 Vac lighting connection: Supported, with steady operation
• 24 Vdc warning light connection: Supported, with intermittent operation
• Photocell connection: Internal and external safety photocells supported
• Photocell operation: Activated during closing, with the option to reverse to opening
• Slow stopping: Supported
• Motor torque or force adjustment: Supported
• Learning procedure: Using SEL / SET buttons
• LED diagnostics: Supported
• Control unit technology: SMD
• CE declaration of conformity: For the motors and circuit board
• Package contents: 2 SW300 motors, S7-150 control unit with a sealed plastic enclosure, 3 Wiz remote controls, VG-PC-2 photocell set, VG-LED LED beacon, mounting brackets and pins, 2 × 8 μF capacitors, 2 release keys, and installation instructions in Greek