Skroutz.mt

C-OBS125-X Battery Powered Eccentric Sander 125mm Battery 20V 1x with Speed Control and with Suction System 5909240900
Sanders

C-OBS125-X Battery Powered Eccentric Sander 125mm Battery 20V 1x with Speed Control and with Suction System 5909240900

The Scheppach C-OBS125-X random orbital sander is powered by a 20 V battery and is suitable for standard 125 mm sanding discs. The oscillation speed can be adjusted from 6,000 to 24,000 min using a...

The Scheppach C-OBS125-X random orbital sander is powered by a 20 V battery and is suitable for standard 125 mm sanding discs. The oscillation speed can be adjusted from 6,000 to 24,000 min using a rotary dial, allowing you to adapt it to the task and material. Soft start ensures a smooth start-up, while the hook-and-loop system makes changing sanding discs...

See full description See full description

Top specs

  • Number of Batteries 1

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • See all
33 89 €
Delivery by Wed, 11 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.6 (112)
4.6 (112 reviews)
Greece
1 piece
See Power Tools on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Scheppach C-OBS125-X random orbital sander is powered by a 20 V battery and is suitable for standard 125 mm sanding discs. The oscillation speed can be adjusted from 6,000 to 24,000 min⁻¹ using a rotary dial, allowing you to adapt it to the task and material. Soft start ensures a smooth start-up, while the hook-and-loop system makes changing sanding discs easy.

Dust is collected in a dust bag or via a vacuum extraction system. Its low profile allows sanding close to edges, while the switch is protected from dust. It is compatible with Scheppach IXES 20 V batteries and chargers, sold separately. The package includes four sanding discs (K60, K80, K120, K240), a vacuum adapter and a dust bag.

  • Power source: Battery
  • Voltage: 20 V
  • Number of batteries: 1
  • Sanding disc diameter: 125 mm
  • Speed: 6,000–24,000 min⁻¹
  • Orbit diameter: 2 mm
  • Speed adjustment: Rotary dial
  • Start-up: Soft start
  • Disc attachment system: Hook and loop
  • Dust collection: Dust bag or vacuum extraction system
  • Switch protection: Dust-protected
  • Compatibility: Scheppach IXES 20 V batteries and chargers
  • Package contents: 4 sanding discs (K60, K80, K120, K240), vacuum adapter, dust bag

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
20 V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Scheppach C-OBS125-X random orbital sander is powered by a 20 V battery and is suitable for standard 125 mm sanding discs. The oscillation speed can be adjusted from 6,000 to 24,000 min⁻¹ using a rotary dial, allowing you to adapt it to the task and material. Soft start ensures a smooth start-up, while the hook-and-loop system makes changing sanding discs easy.

Dust is collected in a dust bag or via a vacuum extraction system. Its low profile allows sanding close to edges, while the switch is protected from dust. It is compatible with Scheppach IXES 20 V batteries and chargers, sold separately. The package includes four sanding discs (K60, K80, K120, K240), a vacuum adapter and a dust bag.

  • Power source: Battery
  • Voltage: 20 V
  • Number of batteries: 1
  • Sanding disc diameter: 125 mm
  • Speed: 6,000–24,000 min⁻¹
  • Orbit diameter: 2 mm
  • Speed adjustment: Rotary dial
  • Start-up: Soft start
  • Disc attachment system: Hook and loop
  • Dust collection: Dust bag or vacuum extraction system
  • Switch protection: Dust-protected
  • Compatibility: Scheppach IXES 20 V batteries and chargers
  • Package contents: 4 sanding discs (K60, K80, K120, K240), vacuum adapter, dust bag

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
20 V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

33,89 €
14,00 €   shipping cost

Scheppach