Skroutz.mt

Krausmann Grinder 125mm Electric 1100W
Angle Grinders

Krausmann Grinder 125mm Electric 1100W

The Krausmann angle grinder is designed for cutting and grinding. It features a non-slip three-position side handle with a holder for the disc wrench, and special insulation that limits heat transfer...

The Krausmann angle grinder is designed for cutting and grinding. It features a non-slip three-position side handle with a holder for the disc wrench, and special insulation that limits heat transfer from the head to the motor. The removable plastic filters protect against fine particles.

  • Power supply: Mains
  • Voltage: 230 V - 50 Hz
  • Power: 1100 W
  • No-load...
See full description See full description

Top specs

  • Power

    The more watts, the more power the wheel will have to cut even harder materials (e.g. thick steel) and the more endurance it will have to work for longer periods without problems.
    2. For example:
    - 500W: Suitable for polishing
    - 1000W: Suitable for grinding
    - 1000W and above: Suitable for cutting

  • Maximum Disc Diameter

    From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

    From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
  • See all
37 27 €
Delivery Wed, 04 Nov - Fri, 06 Nov
14,00 €   shipping cost
Sent from Greece
From Aggeloy 4.7 (6)
4.7 (6 reviews)
Greece
4 pieces
See Power Tools on the page of Aggeloy

Learn more about invoicing
Product report

Description

Description

The Krausmann angle grinder is designed for cutting and grinding. It features a non-slip three-position side handle with a holder for the disc wrench, and special insulation that limits heat transfer from the head to the motor. The removable plastic filters protect against fine particles.

  • Power supply: Mains
  • Voltage: 230 V - 50 Hz
  • Power: 1100 W
  • No-load speed: 3000–11000 rpm
  • Maximum disc diameter: 125 mm
  • Spindle thread: M14
  • Noise level: 81 dB
  • Weight: 1.75 kg
  • Handle: Side-mounted, non-slip, 3-position
  • Guard: Safety guard with clip
  • Filters: Removable plastic filters for protection against fine particles
  • Package contents: Angle grinder wrench integrated into the handle, backing flange, outer flange, carbon brush set, user manual

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Power Source
Electric

Power Source

Electric
Suitable for long and demanding work.
Maximum Motor Speed
11000 rpm

Maximum Motor Speed

The faster the speed, the easier the wheel can cut through material. Wheels with smaller diameter (up to 150mm disc diameter) typically operate at 10,000 rpm, while those with larger diameter (with disc diameter above 180mm) operate at 6,500 rpm.
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
125 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
Net Weight
1750 gr

Battery Specifications

Lithium
No

Current Specifications

Power
1100 W

Power

The more watts, the more power the wheel will have to cut even harder materials (e.g. thick steel) and the more endurance it will have to work for longer periods without problems.
2. For example:
- 500W: Suitable for polishing
- 1000W: Suitable for grinding
- 1000W and above: Suitable for cutting

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
No
With Brake
No
Keyless Disc Change
No

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • johny_guitar
    5
    johny_guitar

    Verified purchase

    This review is about the power: 1400 W

    I don't have much experience with grinders, but I tried it to scrape a large part of my terrace from mold and old insulation and cement. It didn't get stuck anywhere or overheat. It also has an option where you can place the handle on top, as well as an easy lever option for the guard position without screwing or unscrewing. The switch is one of those you press and it stays continuously on, speed selection, and it has quite a bit of power and is smooth at low speeds.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    GIANNIS_RIGOPOULOS63
    This review is about the power: 1400 W

    • Construction quality
    • Weight
    • Convenient to hold
    • Power
    • Does the motor heat up when you use it?
    • Stability
    • Value for money
  • johny_guitar
    5
    johny_guitar

    I don't have much experience with grinders, but I tried it to scrape a large part of my terrace from mold and old insulation and cement. It didn't get stuck anywhere or overheat. It also has an option where you can place the handle on top, as well as an easy lever option for the guard position without screwing or unscrewing. The switch is one of those you press and it stays continuously on, speed selection, and it has quite a bit of power and is smooth at low speeds.

    Translated from Greek ·
    0
  • 5
    GIANNIS_RIGOPOULOS63

    0
  • See all

Description & Specifications

The Krausmann angle grinder is designed for cutting and grinding. It features a non-slip three-position side handle with a holder for the disc wrench, and special insulation that limits heat transfer from the head to the motor. The removable plastic filters protect against fine particles.

  • Power supply: Mains
  • Voltage: 230 V - 50 Hz
  • Power: 1100 W
  • No-load speed: 3000–11000 rpm
  • Maximum disc diameter: 125 mm
  • Spindle thread: M14
  • Noise level: 81 dB
  • Weight: 1.75 kg
  • Handle: Side-mounted, non-slip, 3-position
  • Guard: Safety guard with clip
  • Filters: Removable plastic filters for protection against fine particles
  • Package contents: Angle grinder wrench integrated into the handle, backing flange, outer flange, carbon brush set, user manual

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Power Source
Electric

Power Source

Electric
Suitable for long and demanding work.
Maximum Motor Speed
11000 rpm

Maximum Motor Speed

The faster the speed, the easier the wheel can cut through material. Wheels with smaller diameter (up to 150mm disc diameter) typically operate at 10,000 rpm, while those with larger diameter (with disc diameter above 180mm) operate at 6,500 rpm.
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
125 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
Net Weight
1750 gr

Battery Specifications

Lithium
No

Current Specifications

Power
1100 W

Power

The more watts, the more power the wheel will have to cut even harder materials (e.g. thick steel) and the more endurance it will have to work for longer periods without problems.
2. For example:
- 500W: Suitable for polishing
- 1000W: Suitable for grinding
- 1000W and above: Suitable for cutting

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
No
With Brake
No
Keyless Disc Change
No

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • johny_guitar
    5
    johny_guitar

    Verified purchase

    This review is about the power: 1400 W

    I don't have much experience with grinders, but I tried it to scrape a large part of my terrace from mold and old insulation and cement. It didn't get stuck anywhere or overheat. It also has an option where you can place the handle on top, as well as an easy lever option for the guard position without screwing or unscrewing. The switch is one of those you press and it stays continuously on, speed selection, and it has quite a bit of power and is smooth at low speeds.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    GIANNIS_RIGOPOULOS63
    This review is about the power: 1400 W

    • Construction quality
    • Weight
    • Convenient to hold
    • Power
    • Does the motor heat up when you use it?
    • Stability
    • Value for money
  • johny_guitar
    5
    johny_guitar

    I don't have much experience with grinders, but I tried it to scrape a large part of my terrace from mold and old insulation and cement. It didn't get stuck anywhere or overheat. It also has an option where you can place the handle on top, as well as an easy lever option for the guard position without screwing or unscrewing. The switch is one of those you press and it stays continuously on, speed selection, and it has quite a bit of power and is smooth at low speeds.

    Translated from Greek ·
    0
  • 5
    GIANNIS_RIGOPOULOS63

    0
  • See all
37,27 €
14,00 €   shipping cost