The Folksafe FS-HDP4110P video balun transmits video from a camera to a recorder over a UTP Cat 5e/6 cable and can also power the camera through the same cable. It is single-channel and compatible with HD-TVI, HD-CVI, HD-AHD, CVBS and POC analog cameras.
Without power, the transmission distance depends on the standard and resolution: for HD-TVI, it reaches up to 400 m at 720p, 250 m at 1080p and 3MP, 180 m at 4MP and 5MP, and 130 m at 4K. For HD-CVI, it reaches up to 450 m at 720p, 250 m at 1080p, and 200 m at 4MP and 4K. For HD-AHD, it reaches up to 450 m at 720p, 320 m at 960p, 250 m at 1080p and 3MP, 200 m at 4MP, 180 m at 5MP, and 150 m at 4K; for CVBS, it reaches up to 400 m.
-
Channels: 1
-
Signal type: HD-TVI, HD-CVI, HD-AHD, CVBS and POC
-
Cable: UTP Cat 5e/6
-
Wiring: One unshielded twisted pair for each video signal
-
Wire gauge: 24–16 AWG (0.5–1.31 mm)
-
Cable impedance: 100 ± 20 Ω
-
Coaxial cable input impedance: 75 Ω, unbalanced
-
UTP input impedance: 100 Ω, balanced
-
BNC connector: Male
-
UTP terminal: Tool-free push-pin
-
Attenuation: 1.5 dB typical maximum
-
Common-mode rejection: 60 dB typical, from 15 kHz to 71 MHz
-
Packaging: Retail blister pack with hook
