Pébéo water-based paint specifically designed for fabric in a 1Lt bottle. It can be applied to thin or thick fabrics in dark or light shades made from natural or synthetic fibers.

It can be combined with the corresponding Setascrib Opaque markers and with the Setacolor Relief outlines from the fabric painting series.

Application Surfaces:

• Cotton
• Wool
• Velvet
• Jacquard knit
• Polyester
• Mixed fibers
• Leather

Finish: Highly covering with a matte result.

Application Methods: Brush, sponge, pipette, roller, stencil, airbrush.

Dilution / Airbrush Use: Setacolor Opaque paints are ready to use straight from the packaging. If more fluidity or watercolor effect is needed, you can add water. When using with an airbrush, the following steps are required:

• Create a solution of 50% water / 50% Setacolor Lightening medium as a base solution.
• Make a second solution with 50% of the desired Setacolor Opaque color / 50% base solution for use in the airbrush.

Instructions: The fabrics to be painted must be washed once before applying the colors. All colors mix completely with each other. Shake the paint very well before use and apply it to the fabric. The colors dry in about 1 hour and dry completely in 24 hours.

Important! To fix the Setacolor colors, it is necessary to iron from the back of the decorated fabric for 5 minutes without steam. Once fixed and after 48 hours, they are wash-resistant up to 40°C. Tumble drying and dry cleaning are not recommended.

Painting in multiple layers of colors: In case one Setacolor Opaque color goes over another, poor adhesion is observed. For better results, after each layer, use the Setacolor Lightening Medium or the corresponding markers from the series.

Tool Cleaning: Rinse tools with plenty of water and soap.

Storage: Keep the paints away from very high or very low temperatures.