Pébéo water-based paint specially designed for fabric in a 1L bottle. It applies to thin or thick fabrics in dark or light shades made from natural or synthetic fibers. It can be combined with the corresponding Setascrib Opaque markers as well as with the Setacolor Relief outlines from the fabric painting series.

Application Surfaces:

• Cotton
• Wool
• Velvet
• Jersey knit
• Polyester
• Mixed fibers
• Leather

Finish: Highly opaque with a matte result.

Application Methods: Brush, sponge, pipette, roller, stencil, airbrush.

Dilution / Use with Airbrush: The Setacolor Opaque colors are ready to use from their packaging. If you want to achieve more fluidity or a watercolor effect, you can add water to the colors. If you use them with an airbrush, the following steps must be followed:

• Create a solution of 50% water / 50% Setacolor Lightening medium as a base solution.
• Create a second solution with 50% of the desired Setacolor Opaque color / 50% base solution.

Instructions: The fabrics you will paint should be washed once before applying the paints to remove the so-called sizing and to ensure better color adhesion. All colors in the series mix completely. Shake the paint very well before use and apply it to the fabric. The colors dry in about 1 hour after application to the touch. They are fully dry in 24 hours.

Important! To set the Setacolor colors, ironing from the back of the decorated fabric is required for 5 minutes without steam. Once fixed, the colors can withstand washing in a washing machine or by hand at 40°C after 48 hours. Using a tumble dryer and dry cleaning is not recommended.

Painting with multiple layers of colors: In cases where one Setacolor Opaque color is applied on top of another, it is observed that it does not adhere well and does not cover properly. To prevent this, after each layer of color, a layer of Setacolor Lightening Medium should be applied. However, if you want to add details over an already applied color, it is preferable to use the corresponding markers from the series, which have better adhesion for painting over existing colors.

Cleaning tools: To clean the tools, simply rinse with plenty of water and soap.

Storage: Keep the colors away from very high or very low temperatures.