Skroutz.mt

O'Neal 3SRS Inked V.25 Motorcycle Helmet Motocross ECE 22.06
Motorcycle Helmets

O'Neal 3SRS Inked V.25 Motorcycle Helmet Motocross ECE 22.06 Code: ONL000KRA94

Features:

  • Helmet in 2 shells and 2 EPS for increased safety and perfect fit
  • High-quality ABS shell
  • Multiple air vents for optimal ventilation and cooling
  • Compatible with Airflaps
  • Ready for Quin Smart...

Features:

  • Helmet in 2 shells and 2 EPS for increased safety and perfect fit
  • High-quality ABS shell
  • Multiple air vents for optimal ventilation and cooling
  • Compatible with Airflaps
  • Ready for Quin Smart Safety Sensor installation
  • Easy and quick removal of pads with E.Q.R.S. system with emergency straps
  • More safety in case of impact thanks to the central...
See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

O'Neal size guide
O'Neal size guide

Size

O'Neal size guide
International
Review the product
Product report

Description

Description

Features:

  • Helmet in 2 shells and 2 EPS for increased safety and perfect fit
  • High-quality ABS shell
  • Multiple air vents for optimal ventilation and cooling
  • Compatible with Airflaps
  • Ready for Quin Smart Safety Sensor installation
  • Easy and quick removal of pads with E.Q.R.S. system with emergency straps
  • More safety in case of impact thanks to the central plastic screw that detaches on the permanently mounted visor of the helmet
  • Double-D safety with easy strap adjustment for perfect fit
  • Laser cut linings for improved fit
  • Internal lining that absorbs sweat, removable and washable
  • Glasses are securely held in place on the ridge at the back of the shell
  • GoPro® Mount as an optional accessory
  • Meets the new ECE 22.06 standards for increased safety

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
ONL000KRA94

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Colour
Multicolour
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Features:

  • Helmet in 2 shells and 2 EPS for increased safety and perfect fit
  • High-quality ABS shell
  • Multiple air vents for optimal ventilation and cooling
  • Compatible with Airflaps
  • Ready for Quin Smart Safety Sensor installation
  • Easy and quick removal of pads with E.Q.R.S. system with emergency straps
  • More safety in case of impact thanks to the central plastic screw that detaches on the permanently mounted visor of the helmet
  • Double-D safety with easy strap adjustment for perfect fit
  • Laser cut linings for improved fit
  • Internal lining that absorbs sweat, removable and washable
  • Glasses are securely held in place on the ridge at the back of the shell
  • GoPro® Mount as an optional accessory
  • Meets the new ECE 22.06 standards for increased safety

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
ONL000KRA94

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Colour
Multicolour
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

145,00 €
17,00 €   shipping cost