Skroutz.mt

Ncv Geko Brick Meter 20
Clamp Meters

Ncv Geko Brick Meter 20

The NCS GEKO Brick Meter 20 clamp meter measures DC/AC voltage using its jaws, without interrupting the electrical circuit. Other measurements are taken using the included test leads. It features...

The NCS GEKO Brick Meter 20 clamp meter measures DC/AC voltage using its jaws, without interrupting the electrical circuit. Other measurements are taken using the included test leads. It features automatic range selection and measures frequency at high voltage. The LCD has a backlight.

The clamp meter has full overload protection and REL, zeroing and data...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The NCS GEKO Brick Meter 20 clamp meter measures DC/AC voltage using its jaws, without interrupting the electrical circuit. Other measurements are taken using the included test leads. It features automatic range selection and measures frequency at high voltage. The LCD has a backlight.

The clamp meter has full overload protection and REL, zeroing and data hold functions, as well as minimum and maximum value memory. It includes diode and continuity tests, polarity, over-range and low-battery indicators, automatic power-off and non-contact AC voltage detection. It is powered by two 1.5 V AAA batteries, which are not included.

  • Display: Digital
  • True RMS: Yes
  • Non-contact voltage detection (NCV): Yes
  • Maximum jaw opening: 28 mm
  • DC voltage measurement: Up to 600 V
  • AC voltage measurement: Up to 600 V
  • AC voltage frequency: 10 Hz–60 kHz
  • AC current measurement: Up to 400 A
  • Frequency measurement: 10 Hz–10 MHz
  • Capacitance measurement: Up to 40 mF
  • Safety category: CAT II
  • Standard: EN 61010-1, CAT II 600 V / CAT III 300 V
  • Power supply: 2 × 1.5 V AAA batteries, not included

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Maximum Jaw Opening
28 mm

Maximum Jaw Opening

The maximum cable or conductor diameter that the clamp can grip in order to perform a measurement.
with Test Leads
-
Indication
Digital
Bluetooth
No
Safety Category
CAT II
ISO/NIST Calibration Certificate
No

Features & Functions

Inrush Current
-

Inrush Current

Ability to record the instantaneous inrush current (duration ~100ms) absorbed by electric motors, motor-driven devices, and compressors during their momentary startup.
True RMS
Yes

True RMS


The True-RMS method will provide the correct value of the alternating quantity regardless of its waveform.
NCV
Yes
LoZ (Low Impedance / Low Impedance)
-

LoZ (Low Impedance / Low Impedance)

Low impedance function that absorbs induced/parasitic voltages ("phantom" voltages or ghost voltages) from adjacent cables, ensuring that you measure only the actual line voltage.
VFD Mode / LPF (Low Pass Filter)
-

VFD Mode / LPF (Low Pass Filter)

Integrated low-pass filter that cuts off high-frequency harmonic noise (PWM) produced by variable speed drives, allowing accurate voltage and frequency measurement in Inverters.
Temperature Measurement
-

Temperature Measurement

Ability to measure temperature via a connected thermocouple (Type-K terminal), allowing temperature monitoring of pipes, refrigerants, and HVAC components.
Capacitor Capacitance Measurement
Yes

Capacitor Capacitance Measurement

Ability to test and measure capacitor capacitance, allowing the immediate diagnosis of worn starting capacitors in motors, pumps, and compressors.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

37,90 €
14,00 €   shipping cost