The VDS AT-PLUS-2500-KIT-9 sliding gate operator automates sliding garage doors and gates weighing up to 2,500 kg. The motor uses oil-bath lubrication and cooling, features a non-reversible mechanism, and has metal internal gears. The kit includes nine remote controls, safety photocells, an LED warning light with a built-in antenna, and a metal rack.
The motor operates on a 230 VAC power supply and has an output of 650 W. For a gate with an indicative length of 5 m at a temperature of 20 °C, it supports up to 50 opening and closing cycles per hour.
- Operator type: Sliding
- Maximum gate weight: 2,500 kg
- Maximum gate length: 4 m
- Motor power: 650 W
- Operating voltage: 230 VAC, single-phase
- Lubrication and cooling: Oil-bath
- Mechanism: Non-reversible
- Internal gears: Metal
- Opening and closing cycles per hour: Up to 50 for a gate with an indicative length of 5 m at 20 °C
- Maximum operating frequency: S3-90% at 20 °C
- Maximum gate leaf speed: 9.6 m/min
- Motor winding thermal protection: 140 °C
- Gear type: Z16 / m4, 16 teeth
- Limit switches: Mechanical, with microswitches and a spring
- Manual release: Key-operated
- Operating temperature: From -20 °C to +55 °C
- Protection rating: IP-44
- Motor weight: 20 kg
- Motor dimensions: 290 × 150 × 335 mm, excluding the mounting base
- Control unit: 1, with built-in receiver
- Remote controls: 9, with 4 buttons
- Safety photocells: 1 set, wired, with transmitter and receiver
- Warning light: 1 LED with built-in antenna
- Rack: 4 m, metal, module 4, with spacers and screws
- Motor: 1
- Manual release keys: 2
- Screws: 4 galvanized
- Washers: 4 galvanized
- Mounting base: 1 metal
- Limit switch activation plates: 2 metal
- Side covers: 2
- Capacitor: 1, with a capacitance of 25 μF
- User manual: 1
Specifications
- Motor type
- Sliding
- Maximum Weight
- 2500 kg
- Maximum Door Length
- 4 m
- Built-in Control Panel
- Yes
- Wi-Fi
- No
Set Contents
- Motor
- 1 pcs
- Control Panel
- 1 pcs
- Remote Control
- 9 pcs
- Security Beacon
- 1 pcs
- External Antenna
- 1 pcs
- Gear Rack
- 4 m
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.