The Vds At-plus-2500-kit-4 sliding gate operator kit automates gates weighing up to 2,500 kg. The motor is oil-lubricated and oil-cooled, with metal internal gears, while the control panel has a built-in receiver. The kit includes safety photocells and an LED flashing light with a built-in antenna.
The operator has mechanical limit switches and a key-operated release for manual operation. Its maximum duty cycle is S3-90% at 20°C, with up to 50 opening and closing cycles per hour for a gate with a reference length of 5 m at 20°C.
- Type: Sliding gate operator
- Maximum gate weight: 2,500 kg
- Maximum gate length: 4 m
- Motor power: 650 W
- Operating voltage: 230 VAC, single-phase
- Supply current: 2.4 A
- Motor speed: 1,400 rpm
- Drive mechanism: Oil-lubricated and oil-cooled, non-reversible
- Internal gears: Metal
- Gear type: Z16 / m4, 16 teeth
- Limit switches: Mechanical, with microswitches and spring
- Release method: Key-operated
- Maximum duty cycle: S3-90% at 20°C
- Opening and closing cycles per hour: Up to 50 for a gate with a reference length of 5 m at 20°C
- Gate leaf speed: Up to 9.6 m/min
- Winding thermal protection: 140°C
- Operating temperature: From -20°C to +55°C
- Protection rating: IP-44
- Capacitor: 25 μF
- Control panel: 1 unit, with built-in receiver
- Remote controls: 4 units, 4-button
- Safety photocells: 1 set, wired, with transmitter and receiver
- Flashing light: 1 unit, LED with built-in antenna
- External antenna: 1 unit
- Rack: 4 m, metal, module 4, with spacers and screws
- Release keys: 2 units
- Screws: 4 galvanized
- Washers: 4 galvanized
- Mounting base: 1 metal
- Limit switch activation plates: 2 metal
- Side covers: 2 units
- Motor weight: 20 kg
- Motor dimensions: 290 × 150 × 335 mm, including the gear and excluding the mounting base
Specifications
- Motor type
- Sliding
- Maximum Weight
- 2500 kg
- Maximum Door Length
- 4 m
- Built-in Control Panel
- Yes
- Wi-Fi
- No
Set Contents
- Motor
- 1 pcs
- Control Panel
- 1 pcs
- Remote Control
- 4 pcs
- Security Beacon
- 1 pcs
- External Antenna
- 1 pcs
- Gear Rack
- 4 m
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.