The VDS AT-PLUS-2500-kit-10 sliding gate operator moves gates weighing up to 2,500 kg and measuring up to 4 m in length. It features a motor lubricated and cooled in an oil bath, a non-reversible mechanism, and metal internal gears. The motor operates at 230 VAC and has a power rating of 650 W.

The kit includes an electronic control panel with a built-in receiver, 10 four-button remote controls, a wired pair of safety photocells, an LED flashing light with a built-in antenna, and 4 m of metal rack with spacers and screws. The motor has mechanical limit switches with microswitches and a spring, and is released using a key.

• Type: Sliding gate operator
• Maximum gate weight: 2,500 kg
• Maximum gate length: 4 m
• Motor power: 650 W
• Operating voltage: 230 VAC
• Mechanism type: Lubricated and cooled in an oil bath, non-reversible
• Internal gears: Metal
• Duty cycle: S3-90% at 20 °C
• Open/close cycles per hour: Up to 50 for a gate approximately 5 m long at 20 °C
• Gate speed: Up to 9.6 m/min
• Motor winding thermal protection: 140 °C
• Gear type: Z16 / m4 (16 teeth / module 4)
• Limit switches: Mechanical, with microswitches and a spring
• Release: Key-operated
• Operating temperature: From -20 °C to +55 °C
• Protection rating: IP-44
• Control panel: 1 unit, with built-in receiver
• Remote controls: 10 units, with 4 buttons
• Safety photocells: 1 wired set with transmitter and receiver
• Flashing light: 1 LED unit with built-in antenna
• Rack: 4 m metal, module 4, with spacers and screws
• Release keys: 2
• Mounting base: 1 metal base
• Fasteners: 4 galvanized screws and 4 galvanized washers
• Limit switch activation plates: 2 metal plates
• Side covers: 2
• Capacitor: 25 μF
• Motor weight: 20 kg
• Motor dimensions: 290 × 150 × 335 mm, excluding the mounting base
• Color: Gray and black